TCMD4000_08 Datasheet, PDF (2/7 Pages) Vishay Siliconix – Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package

TCMD1000/TCMD4000
Vishay Semiconductors ^{Optocoupler, Photodarlington Output,}
High Gain, Single/Quad Channel, Half
Pitch Mini-Flat Package
ABSOLUTE MAXIMUM RATINGS ⁽¹⁾
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
COUPLER
AC isolation test voltage (RMS)
Total power dissipation
Operating ambient temperature range
Storage temperature range
Soldering temperature ⁽³⁾
V_ISO ⁽²⁾
P_tot
T_amb
T_stg
T_sld
3750
250
- 40 to + 100
- 40 to + 100
260
V_RMS
mW
°C
°C
°C
Notes
(1) _{Tamb = 25 °C, unless otherwise specified.}
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
(2) _{Related to standard climate 23/50 DIN 50014.}
(3) _{Refer to reflow profile for soldering conditions for surface mounted devices.}
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Junction capacitance
OUTPUT
I_F = 50 mA
V_F
V_R = 0 V, f = 1 MHz
C_j
1.25
1.6
V
50
pF
Collector emitter voltage
Emitter collector voltage
Collector dark current
COUPLER
I_C = 100 µA
V_CEO
35
I_E = 100 µA
V_ECO
7
V_CE = 10 V, I_F = 0, E = 0
I_CEO
V
V
100
nA
Collector emitter saturation voltage
Cut-off frequency
Coupling capacitance
I_F = 20 mA, I_C = 5 mA
I_F = 10 mA, V_CE = 5 V,
R_L = 100 Ω
f = 1 MHz
V_CEsat
f_c
C_k
1.0
V
10
kHz
0.3
pF
Note
T_amb = 25 °C, unless otherwise specified.
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO
PARAMETER
TEST CONDITION
I_C/I_F
V_CE = 2 V, I_F = 1 mA
PART
TCMD1000
TCMD4000
SYMBOL
CTR
CTR
MIN.
600
600
TYP.
800
800
MAX.
UNIT
%
%
SWITCHING CHARACTERISTICS
PARAMETER
TEST CONDITION
Rise time
V_CE = 2 V, I_C = 10 mA, R_L = 100 Ω
(see figure 1)
Turn-off time
V_CE = 2 V, I_C = 10 mA, R_L = 100 Ω
(see figure 1)
SYMBOL
t_r
t_off
MIN.
TYP.
300
250
MAX.
UNIT
µs
µs
www.vishay.com
2
For technical questions, contact: [e-mail]
Document Number: 83513
Rev. 1.9, 11-Jan-08