SIP32411 Datasheet, PDF (2/13 Pages) Vishay Siliconix – 2 A, 1.2 V, Slew Rate Controlled Load Switch

SiP32411
Vishay Siliconix
ORDERING INFORMATION
Temperature Range
Package
- 40 °C °C to 85 °C
SC70-6
TDFN4 1.2 mm x 1.6 mm
Notes:
x = Lot code
GE3 and GE4 denote halogen-free and RoHS compliant
Marking
MBxx
AEx
Part Number
SiP32411DR-T1-GE3
SiP32411DNP-T1-GE4
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Supply Input Voltage (V_IN)
Enable Input Voltage (V_EN)
Output Voltage (V_OUT)
Maximum Continuous Switch Current (I_max.)
SC70-6 package
TDFN4 1.2 mm x 1.6 mm
- 0.3 to 6
- 0.3 to 6
- 0.3 to V_IN + 0.3
1.8
2.4
Maximum Pulsed Current (I_DM) V_IN
SC70-6 package
2.2
(Pulsed at 1 ms, 10 % Duty Cycle)
TDFN4 1.2 mm x 1.6 mm
3
ESD Rating (HBM)
4000
Junction Temperature (T_J)
Thermal Resistance (_JA)^a
Power Dissipation (P_D)^a
6 pin SC70-6^b
4 pin TDFN4 1.2 mm x 1.6 mm^c
6 pin SC70-6^b
4 pin TDFN4 1.2 mm x 1.6 mm^c
- 40 to 125
240
170
230
324
Notes:
a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout.
b. Derate 4.5 mW/°C above T_A = 70 °C, see PCB layout.
c. Derate 5.9 mW/°C above T_A = 70 °C, see PCB layout.
Unit
V
A
V
°C
°C/W
mW
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating/conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING RANGE
Parameter
Limit
Unit
Input Voltage Range (V_IN)
Operating Temperature Range
1.1 to 5.5
V
- 40 to 85
°C
www.vishay.com
Document Number: 66710
2
S11-1694-Rev. E, 22-Aug-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000