SIP32401A Datasheet, PDF (2/13 Pages) Vishay Siliconix – 1.1 V to 5.5 V, Slew Rate Controlled Load Switch

www.vishay.com
SiP32401A, SiP32402A
Vishay Siliconix
ORDERING INFORMATION
TEMPERATURE RANGE
PACKAGE
-40 °C to +85 °C
TDFN4 1.2 mm x 1.6 mm
Notes
• x = Lot code
• GE4 denotes halogen-free and RoHS-compliant
MARKING
Gx
Hx
PART NUMBER
SiP32401ADNP-T1GE4
SiP32402ADNP-T1GE4
ABSOLUTE MAXIMUM RATINGS
PARAMETER
LIMIT
Supply Input Voltage (V_IN)
Enable Input Voltage (V_EN)
Output Voltage (V_OUT)
Maximum Continuous Switch Current (I_max.) ^c
Maximum Repetitive Pulsed Current (1 ms, 10 % Duty Cycle) ^c
-0.3 to +6
-0.3 to +6
-0.3 to V_IN + 0.3
2.4
3
ESD Rating (HBM)
4000
Junction Temperature (T_J)
Thermal Resistance (θ_JA) ^a
Power Dissipation (P_D) ^{a, b}
-40 to +125
170
324
Notes
a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout.
b. Derate 5.9 mW/°C above T_A = 70 °C, see PCB layout.
c. T_A = 25 °C, see PCB layout
UNIT
V
A
V
°C
°C/W
mW
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating/conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING RANGE
PARAMETER
Input Voltage Range (V_IN)
Operating Junction Temperature Range (T_J)
LIMIT
1.1 to 5.5
-40 to +125
UNIT
V
°C
S15-1246-Rev. D, 01-Jun-15
2
Document Number: 63705
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000