SIP11203 Datasheet, PDF (2/18 Pages) Vishay Siliconix – Synchronous Rectifier Driver with Power Up/Down Control, Output OVP, Error Amplifier and Precision Reference

SiP11203, SiP11204
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
V_IN, IN_A, IN_B
V_REF, Linear Inputs
Storage Temperature
Junction Temperature
Package Thermal Impedance (R_JA)
16 Pin 44MLP
Package Power Dissipation (package)^a
Notes:
a. Device mounted with all leads soldered to printed circuit board.
Limit
15
- 0.3 to V_L + 0.3
- 65 to + 160
- 40 to + 125
47
745
Unit
V
°C
°C/W
mW
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
RECOMMENDED OPERATING RANGE
Parameter
V_IN
C_VIN
C_VL
C_REF
Linear Inputs (EA+, EA-, OVP_IN)
Error Amplifier Output Voltage
Logic Inputs (IN_A, IN_B)
Reference voltage output current
R_PD
C_PD
Limit
Unit
5.5 to 13
V
1
1
µF
0.1
0 to V_L
0 to 3.5
V
0 to 13
10
µA
> 15
k
1 to 10
nF
SPECIFICATIONS
Parameter
Power Supply
V_L Output Voltage
V_L Temperature Coefficient
V_L Line Regulation
V_L Load Regulation
V_L Supply PSRR
Supply Current
Quiescent Current
Start-up Current Capability
Reference Voltages
V_REF Voltage
V_REF Temperature Coefficient
V_REF Load Regulation
V_REF PSRR
Internal Buffered Reference Voltage
Symbol
Test Conditions
Unless Otherwise Specified
5.5 V  V_IN  13 V
T_A = - 40 °C to 85 °C
V_L
TC1
V_{L_LNR}
V_{L_LDR}
V_{L_PSRR}
I_IN
I_Q
I_STARTUP
Output disabled (Note e)
(Note c)
I_L = 0 mA
I_L = 0 mA to 3.3 mA, V_IN = 5.5 V
f_TEST =100 Hz, (Note c)
V_IN = 5.5 V, C_LOAD(A) = C_LOAD(B) = 6 nF (Note c, d)
V_IN = 7.5 V, C_LOAD(A) = C_LOAD(B) = 6 nF (Note c, d)
Device switching disabled (Note e)
Current sourced from V_IN to V_L, V_L = 0 V
V_REF
TC2
V_{REF_LDR}
V_{REF_PSRR}
V_REFINT
I_REF2 = 0 mA, T_A = 25 °C
I_REF2 = 0 mA
(Note c)
V_IN = 5.5 V, I_REF = 0 to 10 µA
f_TEST = 100 Hz, (Note c)
V_IN = 5.5, measured at R_PD pin
Min.^a
4.75
35
1.212
1.188
2.320
Limits
Typ.^b
5.0
160
3
1.2
70
12
15.5
3.5
45
1.225
1.225
160
1.5
60
2.5
Max.^a Unit
5.25
V
µV/°C
8
mV
10
dB
mA
4.5
55
1.238
1.262
2.5
2.570
V
µV/°C
mV
dB
V
www.vishay.com
Document Number: 73868
2
S11-0975–Rev. C, 16-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000