SI9200EY Datasheet, PDF (2/4 Pages) Vishay Siliconix – CAN Bus Driver and Receiver

Si9200EY
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS^a
Operating Temperature (T_A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40 to 125_C
Junction and Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . -55 to 150_C
Voltage On Any Pin (Except CAN_H and CAN_L)
with Respect to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 to V_DD +0.3 V
Voltage On CAN_H and CAN_L
with Respect to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –3 to +16 V
Supply Voltage, V_DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 to 12 V
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "100 mA
Thermal Ratings^b: R_QJA . . . . . . . . . . . . . . . . . . . . . . . . . 62.5_C/W (no airflow)
Notes
a. Extended exposure to the absolute maximum ratings or stresses beyond
these ratings may affect device reliability or may cause permanent dam-
age to the device. Functional operation at conditions other than the rec-
ommended operating conditions is not implied.
b. Mounted on 1-IN², FR4 PC Board.
RECOMMENDED OPERATING CONDITIONS
V_DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.75 to 5.25 V
Bus Load Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 W
SPECIFICATIONS
Parameter
Input
TX Input Voltage High
TX Input Voltage Low
TX Input Current Low
TX Input Current High
Output
Bus Recessive
Bus Dominant
Reference Output
Symbol
V_INH
V_INL
I_IL
I_IH
V_{CAN_HR},
V_{CAN_LR}
V_DIF =
V_{CAN_HR} –
V_{CAN_LR}
V_{CAN_HD}
V_{CAN_LD}
V_DIF =
V_{CAN_HD} –
V_{CAN_LD}
V_REF
Receive Output
(Bus Recessive Condi-
tions)
V_RXH
Receive Output
(Bus Dominant Conditions)
V_RXL
Internal Resistance
from Bus Pins
Internal Capacitance
from Bus Pins^c
R_IN,
BUS_L
R_IN, BUS_H
R_DIFF
C_IN
(CAN_H,
CAN_L)
Test Conditions
Unless Otherwise Specified
V_DD = 4.75 to 5.25 V
TX = 0 V
TX = V_DD
TX = V_INH, R_L = 1
TX = V_INL, R_L = 60 W
–25 mA v I_REF v 25 mA
TX = V_INH
–2.0 V v V_{CAN_H}, V_{CAN_L} v 7 V
–1 V v V_{CAN_H} – V_{CAN_L} v
0.5 V (Bus Recessive)
TX = V_INH
–0.8 V v V_{CAN_H} v 7 V
–2 V v V_{CAN_L} v 5.8 V
0.9 V v V_{CAN_H} – V_{CAN_L} v 5 V (Bus
Dominant)
I_OUT = –10 mA
I_OUT = –100 mA
I_OUT = –2 mA
I_OUT = 10 mA
I_OUT = 100 mA
I_OUT = 2 mA
TX = V_INH (Recessive)
Limits
T_A = –40 to 125_C
Min^b Typ^a Max^b
Unit
4
V
1
–50
–2.0
mA
–1.0
1.0
2
2.5
3
–0.5
0
0.05
2.75
3.5
4.5
0.5
1.5
2.25
1.5
2
3
0.5 V_DD
–0.2
0.5 V_DD
0.5 V_DD
+0.2
V
V_DD –0.3
V_DD
–0.05
V_DD
–1
V_DD –0.2
V_DD
V_DD
–1.75
–1
0.05
0.3
0.2
1
1
1.75
5
50
5
50
kW
10
100
50
pF
www.Vishay Siliconix.com S FaxBack 408-970-5600
2
Document Number: 70015
S-49717—Rev. B, 27-Sep-96