SI9136_11 Datasheet, PDF (2/16 Pages) Vishay Siliconix – Multi-Output Power-Supply Controller

Si9136
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Unit
V_IN to GND
P_GND to GND
V_L to GND
BST₃, BST₅, BSTFY to GND
V_L Short to GND
LX₃ to BST₃; LX₅ to BST₅; LXFY to BST
Inputs/Outputs to GND (CS₃, CS₅, CSP, CSN)
5 ON/OFF, 3 ON/OFF, 12 ON/OFF
- 0.3 to + 36 V
±2
V
- 0.3 to + 6.5 V
- 0.3 V to + 36 V
Continuous
- 6.5 V to 0.3 V
- 0.3 V to (V_L + 0.3 V)
V
- 0.3 V to + 5.5 V
DL3, DL5 to PGND
DLFY to PGND
- 0.3 V to (V_L + 0.3 V)
Input of Flyback
DH3 to LX₃, DH5 to LX₅, DHFY to LXFY
Continuous Power Dissipation (T_A = 90 °C)^a
Operating Temperature Range
28-Pin SSOP^b
- 0.3 V to (BSTX + 0.3 V)
V
572
mW
0 °C to 90 °C
Storage Temperature Range
- 40 °C to 125 °C
°C
Lead Temperature (Soldering, 10 Sec.)
300
Notes:
a. Device Mounted with all leads soldered or welded to PC board.
b. Derate 9.25 mW/°C above 90 °C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS
Parameter
3.3 V Buck Controller
Total Regulation (Line, Load, and Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
5 V Buck Controller
Total Regulation (Line, Load, and Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
12 V Flyback Controller
Total Regulation (Line, Load, and Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
Internal Regulator
V_L Output
V_L Fault Lockout Voltage
V_L Fault Lockout Hysteresis
V_L /FB5 Switchover Voltage
V_L /FB5 Switchover Hysteresis
Specific Test Conditions
V_IN = 15 V , I_VL = I_REF = 0 mA
T_A = 0 °C to 90 °C, All Converters ON
V_IN = 6 to 30 V, 0 < V_CS3 - V_FB3 < 90 mV
V_IN = 6 to 30 V
0 < V_CS3 - V_FB3 < 90 mV
V_CS3 - V_FB3
L = 10 µH, C = 330 µF
R_SENSE = 20 m
V_IN = 6 to 30 V, 0 < V_CS5 - V_FB5 < 90 mV
V_IN = 6 to 30 V
0 < V_CS5 - V_FB5 < 90 mV
V_CS5 - V_FB5
L = 10 µH, C = 330 µF
R_SENSE = 20 m
V_IN = 6 to 30 V, 0 < V_CSP - V_CSN < 300 mV
V_IN = 6 to 30 V
0 < V_CSP - V_FBN < 300 mV
V_CSP - V_CSN
L = 10 µH, C = 100 µF
R_SENSE = 100 m, C_comp = 120 pF
All Converters OFF, V_IN > 5.5, 0 < I_L < 30 mA
Min.^a
Limits
Typ.^b
Max.^a
Unit
3.23 3.33 3.43
V
± 0.5
%
± 0.5
90
125
160
mV
50
kHz
65
°
4.88 5.03 5.18
V
± 0.5
%
± 0.5
90
125
160
mV
50
kHz
65
°
11.4 12.0 12.6
V
± 0.5
%
± 0.5
330
410
500
mV
10
kHz
65
°
4.7
5.5
V
3.6
4.2
75
mV
4.2
4.7
V
75
mV
www.vishay.com
Document Number: 70818
2
S11-0975-Rev. D, 16-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000