SFH617A_15 Datasheet, PDF (2/9 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, High Reliability

www.vishay.com
SFH617A
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
Forward current
Forward surge current
LED power dissipation
OUTPUT
t_p ≤ 10 μs
at 25 °C
V_R
6
V
I_F
60
mA
I_FSM
2.5
A
P_diss
70
mW
Collector emitter voltage
Emitter collector voltage
Collector current
Collector peak current
Ouput power dissipation
COUPLER
V_CEO
70
V
V_ECO
7
V
I_C
50
mA
t_p/T = 0.5, t_p ≤ 10 ms
I_CM
100
mA
at 25 °C
P_diss
150
mW
Operation temperature
Storage temperature range
Soldering temperature ⁽¹⁾
2 mm from case, ≤ 10 s
T_amb
- 55 to + 110
°C
T_stg
- 55 to + 150
°C
T_sld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through}
hole devices (DIP).
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
OUTPUT
I_F = 60 mA
V_R = 6 V
V_R = 0 V, f = 1 MHz
V_F
1.35
1.65
V
I_R
0.01
10
μA
C_O
13
pF
Collector emitter capacitance
Collector emitter leakage current
COUPLER
V_CE = 5 V, f = 1 MHz
V_CE = 10 V
C_CE
SFH617A-1 I_CEO
SFH617A-2 I_CEO
SFH617A-3 I_CEO
SFH617A-4 I_CEO
5.2
pF
2
50
nA
2
50
nA
5
100
nA
5
100
nA
Collector emitter saturation voltage
Coupling capacitance
I_F = 10 mA, f = 1 MHz
V_CEsat
C_C
0.25
0.4
V
0.4
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Rev. 2.4, 31-Aug-15
2
Document Number: 83740
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000