S102C_11 Datasheet, PDF (2/6 Pages) Vishay Siliconix – High Precision Foil Resistor with TCR of ± 2.0 ppm/°C, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 %

S Series
Vishay Foil Resistors
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
L
Optional Customer Part Number
W
Print specification, etc. if required
Date Code
VFR
01 10
H
XXXX Year Week
S102C
XXXXXX
100R01
0.01 %
Resistance
Value Code
Tolerance
ST¹⁾
Model Number
SW
LL
LS
Lead Material #22 AWG
Round Solder Coated Copper
(Pb - free coating available)
Note
1. Standoffs provided to allow proper flushing of flux, debris, and contaminates from under resistor after all solder operations.
2. The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board.
TABLE 2 - MODEL SELECTION
MODEL
NUMBER
AMBIENT
RESISTANCE MAXIMUM POWER RATING AVERAGE
RANGE WORKING
WEIGHT
(Ω)
VOLTAGE at
at IN GRAMS
+ 70 °C + 125 °C
DIMENSIONS
INCHES
mm
F ⁽¹⁾
(INCHES)
TIGHTEST
TOLERANCE
VS. LOWEST
RESISTANCE
VALUE
S102C
(S102J) ⁽²⁾
1 to 150K
S102K
(S102L) ⁽²⁾
1 to 100K
S104D
(S104F) ⁽¹⁾
1 to 500K
S104K
1 to 300K
S105D
(S105F) ⁽¹⁾
1 to 750K
S105K
1 to 500K
S106D
0.5 to 1M
S106K
0.5 to 600K
0.6 W 0.3 W
up to 100K
300
0.4 W 0.2 W
over 100K
1.0 W 0.5 W
up to 200K
350
0.6 W 0.3 W
over 200K
1.5 W 0.75 W
up to 300K
350
0.8 W 0.4 W
over 300K
2.0 W 1.0 W
up to 400K
500
1.0 W 0.5 W
over 400K
W: 0.105 ± 0.010 2.67 ± 0.25
L: 0.300 ± 0.010 7.62 ± 0.25
H: 0.326 ± 0.010 8.28 ± 0.25
0.6
ST: 0.010 min. 0.254 min.
SW: 0.040 ± 0.005 1.02 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.150 ± 0.005 3.81 ± 0.13
W: 0.160 max.
4.06 max.
(0.138)
L: 0.575 max. 14.61 max. (0.565)
H: 0.413 max. 10.49 max. (0.413)
1.4
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
0.005 %/50 Ω
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.400 ± 0.020 10.16 ± 0.51
0.01 %/25 Ω
0.02 %/12 Ω
0.05 %/5 Ω
W: 0.160 max.
4.06 max.
(0.138)
0.1 %/2 Ω
L: 0.820 max.
20.83 max. (0.890)
0.50 %/1 Ω
H: 0.413 max. 10.49 max. (0.413)
1 %/0.5 Ω
1.9
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.05)
W: 0.260 max.
6.60 max.
L: 1.200 max. 30.48 max.
H: 0.413 max. 10.49 max.
4.0
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.900 ± 0.020 22.86 ± 0.51
Notes
(1) _{S104F and S105F have different package dimensions (see the third column of dimensions). All other specifications are the same.}
(2) _{0.200" (5.08 mm) lead spacing available - specify S102J for S102C, and S102L for S102K.}
www.vishayfoilresistors.com
2
For any questions, contact: [e-mail]
Document Number: 63001
Revision: 29-Jun-11