MDP45 Datasheet, PDF (2/3 Pages) Vishay Siliconix – Thick Film Resistor Networks, Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 45, 46
Vishay Dale
DIMENSIONS in inches [millimeters]
0.850 ± 0.010
[21.59 ± 0.254]
0.120 ± 0.005
[3.05 ± 0.127]
0.310 ± 0.010
[7.87 ± 0.254]
0.250 ± 0.005
[6.35 ± 0.127]
Pin #1
Identification
Pin #1
0.075 ± 0.015
[1.91 ± 0.381]
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative Tol.
7 Spaces
MDP1645 Package &
MDP1646 Package
2.00
1.00
Single Resistor
0.125
- 50
+ 25
Derating
+ 70
+ 125 + 150
Ambient Temperature °C
0.018 ± 0.003
[0.457 ± 0.076]
0.030
[0.762] Typ.
0.130 + 0.015
- 0.010
[3.30 + 0.381
- 0.254]
0.010 + 0.005
- 0.002
[0.254 + 0.127
- 0.051]
0.290 [7.37] Min.
0.320 [8.13] Nom.
0.360 [9.14] Max.
0.700 ± 0.010
[17.78 ± 0.254]
0.050 ± 0.005
[1.27 ± 0.127]
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT MDP Series
Maximum Operating Voltage
VDC
100
Voltage Coefficient of Resistance (Typical) V_eff < 50 ppm/°C
Operating Temperature Range
°C - 55 to + 125
Storage Temperature Range
°C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance
to Solvents:
Permanency testing per
MIL-STD-202, Method 215
Solderability:
Per MIL-STD-202, Method 208E
Terminals:
Copper alloy, solder plated
Body:
Molded epoxy
Weight:
1.5 grams
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
CONDITIONS
MAX. ΔR (Typical Test Lots)
5 cycles between - 65 °C and + 125 °C
± 0.50 % ΔR
2.5 x rated working voltage 5 seconds
± 0.25 % ΔR
45 minutes at full rated working voltage at - 65 °C
± 0.25 % ΔR
240 hours with humidity ranging from 80 % RH to 98 % RH
± 0.50 % ΔR
Leads immersed in + 260 °C solder to within 1/16" of body for 10 seconds
± 0.25 % ΔR
Total of 18 shocks at 100 g's
± 0.25 % ΔR
12 hours at maximum of 20 g's between 10 and 2000 Hz
± 0.2 5% ΔR
1000 hours at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour
“OFF” for full 1000 hour period. Derated according to the curve.
4 1/2 pound pull for 30 seconds
± 0.50 % ΔR
± 0.25 % ΔR
10 000 Megohm (minimum)
-
No evidence of arcing or damage (200 V RMS for 1 minute)
-
Document Number: 31512
Revision: 28-Jul-06
For technical questions contact: [e-mail]
www.vishay.com
2