LH1520AB_11 Datasheet, PDF (2/8 Pages) Vishay Siliconix – Dual 1 Form A Solid-State Relay

www.vishay.com
LH1520AB, LH1520AAC, LH1520AACTR
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
LED continuous forward current
LED reverse voltage
OUTPUT
I_R  10 μA
I_F
50
mA
V_R
8
V
DC or peak AC load voltage
Continuous DC load current, one pole operating
Continuous DC load current, two poles
operating
I_L  50 μA
V_L
350
V
I_L
150
mA
I_L
110
mA
Peak load current (single shot), form B
SSR
t = 100 ms
I_P
(2)
Ambient temperature range
Storage temperature range
Pin soldering temperature ⁽³⁾
Input to output isolation test voltage
Pole-to-pole isolation voltage (S1 to S2) ⁽¹⁾
(dry air, dust free, at sea level)
t = 10 s max.
t = 1 s, I_ISO = 10 μA max.
T_amb
T_stg
T_sld
V_ISO
- 40 to + 85
- 40 to + 150
260
5300
1600
°C
°C
°C
V_RMS
V
Output power dissipation (continuous)
P_diss
600
mW
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Breakdown occurs between the output pins external to the package.}
(2) _{Refer to current limit performance application note for a discussion on relay operation during transient currents.}
(3) _{Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through}
hole devices (DIP).
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
LED forward current, switch turn-on
LED forward current, switch turn-off
LED forward voltage
OUTPUT
I_L = 100 mA, t = 10 ms
V_L = ± 300 V
I_F = 10 mA
I_Fon
1
2
mA
I_Foff
0.2
1.1
mA
V_F
1.15
1.26
1.45
V
On-resistance
Off-resistance
Current limit
Off-state leakage current
Output capacitance
Pole-to-pole capacitance (S1 to S2)
Switch offset
TRANSFER
I_F = 5 mA, I_L = 50 mA
R_ON
12
20
25

I_F = 0 mA, V_L = ± 100 V
R_OFF
0.5
300
G
I_F = 5 mA, t = 5 ms, V_L = ± 6 V
I_LMT
230
270
370
mA
I_F = 0 mA, V_L = ± 100 V
I_O
0.32
200
nA
I_F = 0 mA, V_L = ± 350 V
I_O
1
μA
I_F = 0 mA, V_L = 1 V
C_O
55
pF
I_F = 0 mA, V_L = 50 V
C_O
10
pF
I_F = 5 mA
0.5
pF
I_F = 5 mA
V_OS
0.15
μV
Capacitance (input to output)
V_ISO = 1 V
C_IO
1.1
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
Turn-on time
Turn-off time
I_F = 5 mA, I_L = 50 mA
t_on
I_F = 5 mA, I_L = 50 mA
t_off
TYP.
1.4
0.7
MAX.
2
2
UNIT
ms
ms
Rev. 1.7, 25-Jul-11
2
Document Number: 83818
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000