IL388_07 Datasheet, PDF (2/5 Pages) Vishay Siliconix – Linear Optocoupler, PCMCIA Package

IL388
Vishay Semiconductors ^{Linear Optocoupler, PCMCIA Package}
ABSOLUTE MAXIMUM RATINGS
PARAMETER
COUPLER
Isolation test voltage
Total package power dissipation
Derate linearly from 25 °C
Storage temperature
Operating temperature
Lead soldering time at 260 °C
Isolation resistance
TEST CONDITION
V_IO = 500 V, T_amb = 25 °C
V_IO = 500 V, T_amb = 100 °C
SYMBOL
V_ISO
P_tot
T_stg
T_amb
R_IO
R_IO
VALUE
≤ 2130
≤ 250
≤ 2.8
- 40 to + 150
0 to + 75
≤ 10
≥ 10¹²
≤ 10¹¹
UNIT
V_DC
mW
mW/°C
°C
°C
s
Ω
Ω
Note
T_amb = 25 °C, unless otherwise specified.
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied
at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for
extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTCS
PARAMETER
INPUT
Forward voltage
Reverse current
V_F temperature coefficient
Junction capacitance
Dynamic resistance
OUTPUT
Junction capacitance
AC Characteristics photovoltaic mode
Frequency response
Phase response
Rise time
COUPLER
Capacitance (input to output)
Common mode capacitance
Coupled characteristics
K₁
THD
K₃ = K₂/K₁
TEST CONDITION
PART SYMBOL MIN.
I_F = 10 mA
V_R = 3.0 V
V_F = 0 V, f = 1.0 MHz
I_F = 10 mA
V_F = 0 V, f = 1.0 MHz
I_P1 = 25 mA modulation
current ΔI_P1 = ± 6.0 µA
I_P1 = 25 mA modulation
current ΔI_P1 = ± 6.0 µA
I_P1 = 25 mA modulation
current ΔI_P1 = ± 6.0 µA
V_F = 0 V, f = 1.0 MHz
V_F = 0 V, f = 1.0 MHz
I_F = 2.0 mA, V_D = 0 V
f₀ = 316, I_PI = 35 µA, V_D = 0 V
I_F = 2.0 mA, V_D = 0 V
V_F
I_R
ΔV_F/Δ °C
C_j
ΔV_F/ΔI_F
C_j
BW (- 3 db)
t_r
C_IO
C_CM
K1
0.007
- 83
0.690
TYP.
1.8
0.01
- 2.2
15
6.0
12
1.0
45
350
1.0
0.5
MAX. UNIT
2.1
V
10
µA
mW/°C
pF
Ω
pF
50
MHz
°
ns
pF
pF
db
1.311
Note
T_amb = 25 °C, unless otherwise specified.
Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
www.vishay.com
2
For technical questions, contact: [e-mail]
Document Number: 83625
Rev. 1.5, 28-Nov-07