HDN Datasheet, PDF (2/4 Pages) Vishay Siliconix – Hermetic Metal Film Resistors, Military/Established Reliability, MIL-PRF-55182 Qualified, Type RNR, Characteristics E and C

www.vishay.com
HDN (Military RNR/RNN)
Vishay Angstrohm
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNR55E49R9BSM76 (preferred part number format)
RNR 5 5 E 4 9 R 9 BSM7 6
MIL STYLE ⁽¹⁾
CHARACTERISTIC ⁽²⁾
RNR = Solderable only
RNN = Weldable only
(see Standard
Electrical
Specifications table)
E = 25 ppm
C = 50 ppm
RESISTANCE
VALUE
3 digit significant
figure, followed
by
a multiplier
Use “R” for
values
< 100 
10R0 = 10 
49R9 = 49.9 
2152 = 21.5 k
3014 = 3.01 M
TOLERANCE
CODE
B = ± 0.1 %
D = ± 0.5 %
F=±1%
FAILURE RATE
PACKAGING
SPECIAL
M = 1.0 %/1000 h M76 = Foil bag Blank = Standard
P = 0.1 %/1000 h
(55, 57, 60)
(Dash Number)
R = 0.01 %/1000 h M77 = Foil bag (up to 3 digits)
S = 0.001 %/1000 h
(65, 70, 75)
From 1 to 999
BSL = Foil bag,
as applicable
single lot date code 1 = Hot solder dip
RJ7 = T/R (55, 57, 60) (57’s, 60’s, 75’s)
RJ8 = T/R (65, 70, 75) 4 = Hot solder dip
RSL = T/R, single lot
(70’s)
date code
65 = Hot solder
dip (55’s, 65’s)
Historical Part Numbering: RNR55E49R9BS (will continue to be accepted)
RNR55
E
49R9
B
S
MIL STYLE
CHARACTERISTIC
RESISTANCE
VALUE
TOLERANCE
CODE
FAILURE
RATE
Notes
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
(1) _{MODEL RNC: For characteristics C and E (per MIL-PRF-55182) terminal model RNR shall be used as a substitute}
(2) _{For RNR75 only: Characteristic J (± 25 ppm/°C) is also available}
POWER DERATING
120
125 °C
100
80
60
40
20
0
25
50
75 100 125 150 175
AMBIENT TEMPERATURE IN °C
CAGE CODE: 17745
Revision: 15-Nov-12
2
Document Number: 66001
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000