HD Datasheet, PDF (2/4 Pages) Vishay Siliconix – Hermetic, Dual-In-Line Resistor Networks (Custom)

HD
Vishay Thin Film ^{Hermetic, Dual-In-Line Resistor Networks (Custom)}
DIMENSIONS AND IMPRINTING in inches and millimeters
DIMENSIONS
“L” max.
A
B
Part number
Pin #1 ident.
A
B
C
Vishay logo _{Date code}
D
H
E
G
F
C
F
I
G
D
E
H
I
INCHES
0.295
0.310 ± 0.010
0.035 ± 0.010
0.100 non-accum.
0.018 ± 0.002
0.130 typical
0.130 max.
0.300 typical
0.010 typical
NUMBER OF PINS
“L” Dimensions
(mm)
8
0.528
(13.41)
14
0.710
(18.03)
16
0.810
(20.57)
18
0.910
(23.11)
MM
7.49
7.88 ± 0.25
0.89 ± 0.25
2.54
0.46 ± 0.05
3.30
3.30
7.62
0.25
20
1.010
(25.65)
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Lead (Pb)-free Option
Lead (Pb)-free Finish
Passivated nichrome or tantalum nitride
Alumina
Ceramic
Copper alloy
96.5 % Sn, 3.0 % Ag, 0.5 % Cu
Hot solder dip
ORDERING INFORMATION CHECK LIST
Special requirements should be identified in advance, but as a minimum, you should have the following information ready.
ELECTRICAL
MECHANICAL
1. Resistors, by value and tolerance
2. Reference resistor(s) and matching of which resistors to which
reference resistors
3. Resistance by ratio
4. Absolute temperature coefficient of resistivity
5. Temperature tracking of subordinate resistors to reference
resistor(s)
6. Maximum operating voltage
7. Resistor power ratings
8. Operating temperature range
1. Maximum allowable seated height (from PC board to top of
network)
2. Special marking concerns
3. Schematic pin out of package
4. Specify if lead (Pb)-free
For additional assistance refer to VISHAY Thin Film’s Guide to Understanding Thin Film Precision.
Resistor Networks or Application Engineering.
All standard products may be ordered directly from VISHAY Thin Film.
www.vishay.com
100
For technical questions, contact: [e-mail]
Document Number: 60047
Revision: 31-Jul-08