DG604 Datasheet, PDF (2/10 Pages) Vishay Siliconix – 1.0 pC Charge Injection, 100 pA Leakage, 4-Channel Multiplexer

DG604
Vishay Siliconix
TRUTH TABLE
Enable
Input
L
H
H
H
H
New Product
Selected Input
A1
A0
X
X
L
L
L
H
H
L
H
H
On Switches
DG604
All Switches Open
D to S1
D to S2
D to S3
D to S4
ORDERING INFORMATION
Temp. Range
- 40 °C to 125 °C^a
Notes:
a. - 40 to 85 °C datasheet limits apply.
Package
14-Pin TSSOP
16-Pin miniQFN
Part Number
DG604EQ-T1-E3
DG604EN-T1-E4
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Limit
Unit
V+ to V-
14
GND to V-
Digital Inputs^a, V_S, V_D
7
V
(V-) - 0.3 to (V+) + 0.3
or 30 mA, whichever occurs first
Continuous Current (Any Terminal)
Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle)
30
mA
100
Storage Temperature
- 65 to 150
°C
Power Dissipation (Package)^b
14-Pin TSSOP^c
16-Pin miniQFN^{d, e}
450
mW
525
Thermal Resistance (Package)^b
14-Pin TSSOP
16-Pin miniQFN
178
C/W
152
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 5.6 mW/°C above 70 °C.
d. Derate 6.6 mW/°C above 70 °C.
e. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
www.vishay.com
2
Document Number: 69934
S-72668-Rev. A, 24-Dec-07