DG408L Datasheet, PDF (2/11 Pages) Vishay Siliconix – Precision 8-Ch/Dual 4-Ch Low Voltage Analog Multiplexers

DG408L/409L
Vishay Siliconix
TRUTH TABLES AND ORDERING INFORMATION
TRUTH TABLE Ċ DG408L
A₂
A₁
A₀
EN
On Switch
X
X
X
0
0
0
0
1
None
1
0
0
1
1
2
0
1
0
1
3
0
1
1
1
4
1
0
0
1
5
1
0
1
1
6
1
1
0
1
7
1
1
1
1
8
TRUTH TABLE Ċ DG409L
A₁
A₀
EN
On Switch
X
X
0
0
0
1
None
1
0
1
1
2
1
0
1
3
1
1
1
4
Logic “0” = V_AL v 0.8 V
Logic “1” = V_AH w 2.4 V
X = Don’t Care
For low and high voltage levels for V_AX and V_EN consult “Digital Control” parameters for specific V+ operation.
ORDERING INFORMATION Ċ DG408L
Temp Range
- 40 to 85_C
Package
16-Pin SOIC
16-Pin TSSOP
- 55 to 125_C
16-Pin CerDIP
LCC-20*
*Block Diagram and Pin Configuration not shown.
Part Number
DG408LDY
DG408LDQ
DG408LAK
DG408LAK/883
DG408LAZ/883
ORDERING INFORMATION Ċ DG409L
Temp Range
- 40 to 85_C
Package
16-Pin SOIC
16-Pin TSSOP
- 55 to 125_C
16-Pin CerDIP
LCC-20*
*Block Diagram and Pin Configuration not shown.
Part Number
DG409LDY
DG409LDQ
DG409LAK
DG409LAK/883
DG409LAZ/883
ABSOLUTE MAXIMUM RATINGS
Voltage Referenced to V-
V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 V
GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Digital Inputs^a, V_S, V_D . . . . . . . . . . . . . . . . . . . . . . (V- ) - 0.3 V to (V+) +0.3 V
Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Peak Current, S or D
(Pulsed at 1 ms, 10% Duty Cycle Max) . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Storage Temperature: (A Suffix) . . . . . . . . . . . . . . . . . . . . . . . . . - 65 to 150_C
(D Suffix) . . . . . . . . . . . . . . . . . . . . . . . . - 65 to 125_C
Power Dissipation (Package)^b
16-Pin Plastic TSSOP^c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 mW
16-Pin Narrow SOIC^c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 mW
16-Pin CerDIP^d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 900 mW
LCC-20^e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750 mW
Notes
a. Signals on S_X, D_X, A_x, or EN exceeding V+ or V - will be clamped by
internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 7.6 mW/_C above 75_C.
d. Derate 12 mW/_C above 75_C.
e. Derate 10 mW/_C above 75_C.
www.vishay.com
2
Document Number: 71342
S-03720—Rev. D, 07-Apr-03