English
Language : 

DG2731 Datasheet, PDF (2/9 Pages) Vishay Siliconix – Low Voltage, 0.4 Ω, Dual SPDT Analog Switch
DG2731/2732/2733
Vishay Siliconix
TRUTH TABLE
Logic
EN (DG2733 only)
0
1
1
1
0
0
1
0
NC1, 2
ON
OFF
OFF
OFF
NO1, 2
OFF
ON
OFF
OFF
ORDERING INFORMATION
Temp Range
Package
Part Number
–40 to 85°C
MSOP–10
DFN–10
DG2731DQ–T1–E3
DG2732DQ–T1–E3
DG2733DQ–T1–E3
DG2731DN–T1–E4
DG2732DN–T1–E4
DG2733DN–T1–E4
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
Parameter
Symbol
Limit
Unit
Reference to GND
V+
IN, COM, NC, NOa
Current (Any terminal except NO, NC or COM)
–0.3 to 5.0
V
–0.3 to (V+ + 0.3)
30
Continuous Current (NO, NC, or COM)
±250
mA
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
±500
Storage Temperature (D Suffix)
–65 to 150
°C
Package Solder Reflow Conditionsd
10–PIN MSOP
10–PIN DFN
Power Dissipation (Packages)b
MSOP–10c
DFN–10d
320
mW
1191
Notes
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 4.0 mW/C above 70°C
d. Derate 14.9 mW/C above 70°C
e. Manual soldering with iron is not recommended for leadless components. The QFN is a leadless package. The end of the lead terminal is
exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed
and is not required to ensure adequate bottom side solder interconnection.
SPECIFICATIONS (V+ = 1.8 V)
Parameter
Analog Switch
Analog Signal Ranged
On-Resistance
Digital Control
Input High Voltage
Input Low Voltage
Input Capacitance
Power Supply
Power Supply Current
Symbol
Test Condition
Otherwise Unless Specified
V+ = 1.8 V, VIN = 0.4 or 1.4 Ve
Tempa
Limits
–40 to 85°C
Minb
Typc
Maxb
Unit
VNO, VNC,
VCOM
Full
0
rON
V+ = 1.8 V, VCOM = 0.9 V, INO, INC = 100 mA
Room
Full
V+
V
0.7
1.0
Ω
1.2
VINH
VINL
Cin
Full
1.4
Full
V
0.4
Full
4
pF
I+
VIN = 0 or V+
Full
1.0
µA
www.vishay.com
2
Document Number: 73484
S-51920–Rev. A, 12-Sep-05