DG2303 Datasheet, PDF (2/5 Pages) Vishay Siliconix – High-Speed, Low rON, 1.8-V/2.5-V/3.3-V/5-V, SPST Analog Switch (1-Bit Bus Switch)

DG2303
Vishay Siliconix
New Product
ABSOLUTE MAXIMUM RATINGS
Reference to GND
V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6 V
OE, A, B^a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (V+ + 0.3 V)
Continuous Current (Any terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . "50 mA
Peak Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "200 mA
(Pulsed at 1 ms, 10% duty cycle)
Storage Temperature (D Suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150°C
Power Dissipation (Packages)^b
5-Pin SC70^c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW
Notes:
a. Signals on A, or B or OE exceeding V+ will be clamped by internal
diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 3.1 mW/_C above 70_C
SPECIFICATIONS (V+ = 5.0 V)
Test Conditions
Otherwise Unless Specified
Parameter
Symbol
V+ = 1.65 V to 5.5 V, V_IN = V_IH or V_ILe
DC Characteristics
On-Resistance
r_ON
r_ON Flatness^d
r_ON Flatness
Switch Off Leakage Current
I_(off)
Switchl-On Leakage Current
I_(on)
Input High Voltage
V_IH
Input Low Voltage
Input Current
V_IL
I_IL or I_IH
V+ = 1.8 V, V_A = 0 V, I_B = 4 mA
V+ = 1.8 V, V_A = 1.8 V, I_B = 4 mA
V+ = 2.3 V, V_A = 0 V, I_B = 8 mA
V+ = 2.3 V, V_A = 2.3 V, I_B = 8 mA
V+ = 3.0 V, V_A = 0 V, I_B = 24 mA
V+ = 3.0 V, V_A = 3.0 V, I_B = 24 mA
V+ = 4.5 V, V_A = 0 V, I_B = 30 mA
V+ = 4.5 V, V_A = 2.4 V, I_B = 15 mA
V+ = 4.5 V, V_A = 4.5 V, I_B = 30 mA
V+ = 1.8 V, V_A = 0 V to V+, I_B = 4 mA
V+ = 2.5 V, V_A = 0 V to V+, I_B = 8 mA
V+ = 3.3 V, V_A = 0 V to V+, I_B = 24 mA
V+ = 5.0 V, V_A = 0 V to V+, I_B = 30 mA
V+ = 5.5 V, V_A = 1 V/4.5 V, V_B = 4.5 V/1 V
V+ = 5.5 V, V_A = V_B = 1 V/4.5 V
V+ = 1.65 V to 1.95 V
V+ = 2.3 V to 2.7 V
V+ = 3.0 V to 3.6 V
V+ = 4.5 V to 5.5 V
V+ = 1.65 V to 1.95 V
V+ = 2.3 V to 2.7 V
V+ = 3.0 V to 3.6 V
V+ = 4.5 V to 5.5 V
V_OE = 0 or V+
Dynamic Characteristics
Prop Delay Bus-to-Bus^f
t_PHL, t_PLH
V_LD = Open, V= 1.65 V to 1.95 V, (Figure 1 and 2)
V_LD = Open, V= 2.3 V to 2.7 V, (Figure 1 and 2)
V_LD = Open, V= 3.0 V to 3.6 V, (Figure 1 and 2)
V_LD = Open, V= 4.5 V to 5.5 V, (Figure 1 and 2)
Temp^a
Min^b
Limits
-40 to 85_C
Typ^c Max^b
Full
28.0
Full
60.0
Full
12.0
Full
30.0
Full
9.0
Full
20.0
Full
7.0
Full
12.0
Full
15.0
Full
125
Full
28
Full
12
Full
6
Full
- 10
10
Full
- 10
10
Full
1.35
Full
1.6
Full
2.0
Full
2.4
Full
0.4
Full
0.4
Full
0.6
Full
0.8
Full
-1
1
Full
5
Full
2
Full
1
Full
1
Unit
W
mA
V
mA
ns
www.vishay.com
2
Document Number: 72073
S-03422—Rev. A, 03-Mar-03