CP00101R000JE14 Datasheet, PDF (2/3 Pages) Vishay Siliconix – Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

www.vishay.com
DIMENSIONS in inches [millimeters]
CPxxxx
LD
LL
L
W
H
CPxxxx...3
LL
CP High Volume
Vishay Dale
L
0.125 [3.18]
LD
typical
H1
H
W
GLOBAL MODEL
CP0002
CP0003
CP0005
CP0005...3
CP0007
CP0007...3
CP0010
CP0010...3
CP0015
CP0020
L ⁽¹⁾
± 0.060 [1.5]
0.71 [18]
0.87 [22]
0.87 [22]
0.87 [22]
1.38 [35]
1.38 [35]
1.89 [48]
1.89 [48]
1.89 [48]
2.36 [60]
W
± 0.040 [1.0]
0.276 [7]
0.315 [8]
0.394 [10]
0.394 [10]
0.394 [10]
0.394 [10]
0.394 [10]
0.394 [10]
0.492 [12.5]
0.551 [14]
DIMENSIONS in inches [millimeters]
H
± 0.040 [1.0]
H1
± 0.060 [1.5]
0.276 [7]
-
0.315 [8]
-
0.354 [9]
-
0.354 [9]
0.413 [10.5]
0.354 [9]
-
0.354 [9]
0.472 [12]
0.354 [9]
-
0.354 [9]
0.472 [12]
0.453 [11.5]
-
0.531 [13.5]
-
LD
± 0.002 [0.05]
0.0256 [0.65]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
0.031 [0.8]
Notes
(1) _{Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.}
LL
± 0.120 [3.0]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
1.378 [35]
MATERIAL SPECIFICATIONS
Element: Wirewound = Copper-nickel alloy or nickel-
chrome alloy, depending on resistance value
Metal Oxide = High temperature fired metal oxide film
Core: Wirewound = Woven fiberglass
Metal Oxide = Ceramic
Body: Steatite ceramic case with inorganic potting
compound
End Caps: Tin plated steel
Terminals: Tinned copper
Part Marking: DALE, model, wattage, value, tolerance, date
code
DERATING
120
100
80
60
40
20
0
- 55 - 25
25
75
40
Wirewound
Metal Oxide
125 175 225 275
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Storage
Humidity
Load Life
Terminal Strength
Resistance to Solder Heat
CONDITIONS OF TEST
- 55 °C to + 275 °C (+ 225 °C for Metal Oxide), 5 cycles, 30 min dwell time
5 x rated power for 5 s
1000 V_RMS, for 1 min
- 65 °C, full rated working voltage for 45 min
75 °C, 90 % to 100 % RH, 240 h
1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”
5 pounds for 30 s; body twisted about axis, 3 x 360° rotations
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
TEST LIMITS (EIA-344)
± (5.0 % + 0.05 ) R
± (4.0 % + 0.05 ) R
± (2.0 % + 0.05 ) R
± (3.0 % + 0.05 ) R
± (5.0 % + 0.05 ) R
± (10.0 % + 0.05 ) R
± (2.0 % + 0.05 ) R
± (4.0 % + 0.05 ) R
Revision: 14-Aug-12
2
Document Number: 30113
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000