CMB02070X2700GB200 Datasheet, PDF (2/7 Pages) Vishay Siliconix – High Pulse Load, High Voltage (up to 0.5 kV) Carbon Film MELF Resistors

www.vishay.com
DIMENSIONS
L
K
L₁
CMB 0207
Vishay Beyschlag
D₁
D
DIMENSIONS AND MASS
TYPE
L
(mm)
D
(mm)
L₁ MIN.
(mm)
D₁
(mm)
K
(mm)
MASS
(mg)
CMB 0207
5.8 + 0/- 0.15
2.2 + 0/- 0.2
3.2
D + 0/- 0.2
1.15 ± 0.1
79
Note
• Color code marking is applied according to IEC 60062 ⁽³⁾ in four bands. Each color band appears as a single solid line, voids are permissible
if at least ²/₃ of the band is visible from each radial angle of view. The last color band for tolerance is approximately 50 % wider than the
other bands. An interrupted brown band between the 2^nd and 3^rd full band indicates the special carbon film type.
PATTERN STYLES FOR MELF RESISTORS
G
X
Y
Z
RECOMMENDED SOLDER PAD DIMENSIONS
TYPE
G
(mm)
WAVE SOLDERING
Y
(mm)
X
(mm)
Z
(mm)
G
(mm)
REFLOW SOLDERING
Y
(mm)
X
(mm)
Z
(mm)
CMB 0207
2.8
2.1
2.6
7.0
3.2
1.7
2.4
6.6
Note
• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or
in publication IPC-7351. They do not guarantee any supposed thermal properties, however, they will be found adequate for most general
applications.
Revision: 16-May-13
2
Document Number: 28755
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000