BFC2809070 Datasheet, PDF (2/5 Pages) Vishay Siliconix – Film Dielectric Trimmers

www.vishay.com
DIMENSIONS in millimeters
10.16
± 0.2
14
-
0
0.2
5.8
± 0.1
7.62 ± 0.2
11.5
-
0
0.3
0.6⁺
0.1
0
(2 x)
0.5 ± 0.1
(2 x)
0.8 ± 0.1 (2 x)
0.8 ± 0.1 (2 x)
0.5 ± 0.1
(2 x)
Marking
8.6 max.
9.2 ± 0.4
4 ± 0.5
Trimmers BFC2 809 070.. series
± 2.54
R
3.81
S
R
1.3 (4 x)
S
BFC2 809 070..
Vishay BCcomponents
3.6 ± 0.2
Depth of
slot = 0.6
0.6 ± 0.05
R = Rotor, S = Stator
Hole pattern
ADJUSTMENT
The trimmers can be adjusted with a screwdriver or
trimming key. Capacitance increase is obtained with
clockwise rotation.
MARKING
The trimmers are marked with the capacitance value in pF,
followed by the letter “E” (single-stator type) or the letter “D”
(differential type).
MOUNTING
The trimmer can be mounted on printed-circuit boards with
a grid of 2.54 mm and a minimum hole diameter of 1.25 mm.
PACKAGING
Blister packs of 70 units each. For smallest packaging
quantity (SPQ) see “Electrical Data” table.
ORDERING INFORMATION
C_min. /C_max.
(pF)
2/12
2.5/20
4/40
5/60
6/80
7/100
CATALOG NUMBER BFC2 809 070..
TOP AND BOTTOM ADJUSTMENT
SINGLE STATOR TYPE
DIFFERENTIAL TYPE
-
018
004
006
008
009
011
012
013
014
015
016
Revision: 04-Aug-15
2
Document Number: 28530
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000