500PGP-ST_13 Datasheet, PDF (2/6 Pages) Vishay Siliconix – Aluminum Capacitors, Power General Purpose Screw Terminals

www.vishay.com
500 PGP-ST
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
Safety
Vent
Thread M x S
d1
L_t
L
A
P
D
B
M_b
l_b
D
H
T
Fig. 2 A: Standard M5 disc: Screw terminal (ST) and screw terminal bolt nut (STB)
Safety Thread M x S
Vent
L_t
L
d₁
B
P
D
B
M_b
l_b
D
H
T
Fig. 2 B: High current M6 disc: Screw terminal (ST) and screw terminal bolt nut (STB)
Notes
• Maximum permissible torque which may be applied to the termination screws: 2 Nm for M5; 2.5 Nm for M6
For accessories refer to datasheet “Mounting Accessories”.
The capacitors are delivered with screws and washers.
• High current disc with 1/4 28 UNF (US) thread is available on request.
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
DESIGN
DRAWING
L±1
L_t ± 1 D ± 1 P ± 0.3 T ± 0.2 H ± 0.3 B ± 0.3 D₁ ± 0.1
M
S-0
M_b
l_b ± 0.1
MASS
(g)
50 x 80
2A
82.8 88.8 51.0 22.2 7.1
4.8 11.0
7.9 M5 9.5 M12 16.0 200
50 x 105
2A
104.8 110.8 51.0 22.2 7.1
4.8 11.0
7.9 M5 9.5 M12 16.0 300
65 x 105
65 x 105 HC
2A
104.8 110.7 65.0 28.5 7.0
4.6 11.9
7.9 M5 9.5 M12 16.0 480
2B
104.8 109.2 65.0 28.5 5.5
3.5 18.0 13.0 M6 8.5 M12 16.0 480
76 x 105
2A
105.8 111.7 76.4 31.8 7.0
4.6 11.7
7.9 M5 9.5 M12 16.0 700
76 x 105 HC
76 x 114
2B
105.8 110.2 76.4 31.8 5.5
3.5 18.3 13.0 M6 8.5 M12 16.0 700
2A
115.8 121.7 76.4 31.8 7.0
4.6 11.7
7.9 M5 9.5 M12 16.0 800
76 x 114 HC
2B
115.8 120.2 76.4 31.8 5.5
3.5 18.3 13.0 M6 8.5 M12 16.0 800
76 x 146
76 x 146 HC
2A
145.8 151.7 76.4 31.8 7.0
4.6 11.7
7.9 M5 9.5 M12 16.0 1000
2B
145.8 150.2 76.4 31.8 5.5
3.5 18.3 13.0 M6 8.5 M12 16.0 1000
76 x 220
2A
219.8 225.7 76.4 31.8 7.0
4.6 11.7
7.9 M5 9.5 M12 16.0 1500
76 x 220 HC
90 x 146 HC
2B
219.8 224.2 76.4 31.8 5.5
3.5 18.3 13.0 M6 8.5 M12 16.0 1500
2B
150.1 155.4 89.4 31.8 7.9
0.0 13.0 13.0 M6 10.0 M12 16.0 1300
90 x 220 HC
2B
218.1 223.4 89.4 31.8 7.9
0.0 13.0 13.0 M6 10.0 M12 16.0 2000
Note
• For bolt version holds:
L = L standard - 0.5 mm
L_t = L_t standard - 0.5 mm
Revision: 08-May-13
2
Document Number: 28390
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000