200MT40KPBF Datasheet, PDF (2/5 Pages) International Rectifier – THREE PHASE BRIDGE Power Module

200MT40KPbF
Vishay High Power Products ^{Three Phase Bridge}
(Power Module), 200 A
FORWARD CONDUCTION
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum RMS output current
at case temperature
I_O
120° rect. conduction angle
Maximum peak, one-cycle
forward. non-repetitive on state
surge current
Maximum I²t for fusing
Maximum I²âˆšt for fusing
Value of threshold voltage
Slope resistance
Maximum forward voltage drop
Isolation voltage
I_TSM
I²t
I²âˆšt
V_F(TO)
r_t
V_FM
V_ISOL
t = 10 ms
t = 8.3 ms
No voltage
reapplied
t = 10 ms
t = 8.3 ms
t = 10 ms
t = 8.3 ms
100 % V_RRM
reapplied
No voltage
reapplied
Initial T_J = T_J maximum
t = 10 ms
t = 8.3 ms
100 % V_RRM
reapplied
t = 0.1 to 10 ms, no voltage reapplied
T_J maximum
I_pk = 200 A, T_J = 25 °C, t_p = 400 µs single junction
T_J = 25 °C all terminal shorted, f = 50 Hz, t = 1 s
VALUES
200
85
1800
1880
1520
1590
16.2
14.7
11.6
12.6
162
0.76
2.4
1.40
4000
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction operating
and storage temperature range ^{TJ, TStg}
DC operation per module
Maximum thermal resistance,
junction to case
R_thJC
DC operation per junction
120° rect. conduction angle per module
120° rect. conduction angle per junction
Maximum thermal resistance,
case to heatsink per module
R_thCS
Mounting surface smooth, flat and greased.
Heatsink compund thermal conductivity = 0.42 W/mK
Mounting torque ± 10 %
to heatsink
Approximate weight
A mounting compound is recommended and the torque
should be rechecked after a period of 3 hours to allow
for the spread of the compound. Lubricated threads.
VALUES
- 40 to 150
0.12
0.69
0.14
0.82
0.033
4 to 6
176
UNITS
A
°C
A
kA²s
kA²âˆšs
V
mΩ
V
UNITS
°C
K/W
Nm
g
www.vishay.com
2
For technical questions, contact: [e-mail]
Document Number: 94355
Revision: 29-Apr-08