23226403 Datasheet, PDF (19/19 Pages) Vishay Siliconix – NTC Thermistors, Accuracy Line

2322 640 3/4/6....
Vishay BCcomponents
NTC Thermistors, Accuracy Line
REEL SPECIFICATIONS
Dimensions of the reel.
3
18
CODE NUMBERS AND RELEVANT PACKAGING QUANTITIES
PARAMETER
BULK
TAPE AND REEL⁽¹⁾
1e pitch
TAPE AND REEL⁽¹⁾
2e pitch
2322 640 6....
2322 640 4....
2322 640 3....
Quantity
500
1500 per reel, 2 reels per 1500 per reel, 2 reels per
box
box
Note
1. The maximum number of empty places per reel shall not exceed 0.1% of the total number of
components per reel. With no consecutive positions empty.
30
+1
−0
77
85.6 92
356
max.
CHARACTERISTICS OF TAPED PRODUCTS
Minimum pull-out force of the component: 5 N.
Minimum peel-off force of adhesive tape: 6N.
Minimum tearing force tape: 15 N.
Minimum pull-off force of tape-reel: 5 N.
22.5
STORAGE CONDITIONS
Storage temperature range: −25 to +40 °C.
Maximum relative humidity: 80%.
42 ±1
56 max
JW113
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with “IEC publication 60068-2; Environmental testing”, except where indicated.
STABILITY TESTS
CECC 32 100
CLAUSE
IEC
60 068-2
TEST METHOD
TEST
D3; 4.20.1
1
539
2
D1; 4.19
3
C2; 4.14
14
Other applicable tests
endurance
endurance
endurance
dry heat,
damp heat
rapid change of temperature
21
robustness of leads:
tensile strength
bending
58
soldering:
solderability
resistance to heat
27
impact
29
shock
45
resistance to solvent
6
vibration
2
inflammability
Notes
1. For R₂₅ ≥ 100 kΩ the drift requirement is ∆R/R < 5%.
2. For R₂₅ from 2.2 kΩ to 10 kΩ, requirement is ±2% max.
PROCEDURE
25 °C; 1000 hours
−40 °C; 1000 hours
500 mW; 55 °C; 1000 hours
125 °C; 1000 hours
56 days at 40 °C; 90 to 95% RH
−40 °C to +125 °C; 50 cycles
loading force 10 N
loading force 5 N
240 °C max.; duration 4 s max.
265 °C max.; duration 5 s max.
free fall; 1 m
490 m/s; half sinewave
ambient temp for 5 min;
1.5 mm peak to peak: 10 to 58 Hz
1980, needle flame test
www.vishay.com
88
For technical questions contact: [e-mail]
REQUIREMENTS
∆R/R < 1%
∆R/R < 1%
∆R/R < 3% (note 1)
∆R/R < 3%
∆R/R < 3%
∆R/R < 2%
∆R/R ≤ 1%
∆R/R ≤ 1% (note 2)
∆R/R ≤ 1%
∆R/R ≤ 1%
no traces of lacquer on
no visible damage
non-flammable
Document Number: 29049
Revision: 10-Oct-03