MKP3386Y2_10 Datasheet, PDF (18/20 Pages) Vishay Siliconix – Interference Suppression Film Capacitors MKP Radial Potted Type

MKP 338 6 Y2
Interference Suppression Film Capacitors _{Vishay BCcomponents}
MKP Radial Potted Type
SUB-CLAUSE NUMBER
AND TEST
SUB-GROUP C3
4.13.1 Initial measurements
4.13 Impulse voltage
4.14 Endurance
4.14.7 Final measurements
SUB-GROUP C4
4.15 Charge and discharge
4.15.1 Initial measurements
4.15.3 Final measurements
CONDITIONS
PERFORMANCE REQUIREMENTS
Capacitance
Tangent of loss angle:
at 10 kHz
3 successive impulses, full wave, peak
voltage:
X1: 5 kV
Max. 24 pulses
No selfhealing breakdowns or flash-over
Duration: 1000 h
1.7 x U_RAC at 105 °C
Once in every hour the voltage is increased
to 1000 V_RMS for 0.1 s via resistor of
47 Ω ± 5 %
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 10 % compared to values
measured in 4.13.1.
Tangent of loss angle
Increase of tan δ ≤ 0.008
Compared to values measured in 4.13.1.
Voltage proof
2250 V_DC; 1 min between terminations
2100 V_AC; 1 min between terminations
and case
No permanent breakdown or flash-over
Insulation resistance
≥ 50 % of values specified in Section
“Insulation resistance” of this specification
10 000 cycles
charged to 420 V_DC
Discharge resistance:
R
=
----------4---2---0-----V----d----c----------
1.5 x C (dU/dt)
Capacitance
Tangent of loss angle:
at 10 kHz
Capacitance
Tangent of loss angle
Insulation resistance
|ΔC/C| ≤ 10 % compared to values
measured in 4.15.1.
Increase of tan δ ≤ 0.008
Compared to values measured in 4.15.1.
≥ 50 % of values specified in Section
“Insulation resistance” of this specification
Document Number: 28114
Revision: 01-Jul-10
For technical questions, contact: [e-mail]
www.vishay.com
381