SI9176_04 Datasheet, PDF (16/17 Pages) Vishay Siliconix – High Performance Step-Down DC-DC Converter With Adjustable Output Voltage

Package Information
Vishay Siliconix
MLP33Ć10 (POWER IC ONLY)
N = 10 PITCH: 0.50 mm, BODY SIZE: 3.00 x 3.00
MILLIMETERS*
INCHES
Dim
Min
Nom
Max
Min
Nom
Max
A
0.80
0.90
1.00
A1
0
0.025
0.05
A2
0.65
0.70
0.75
A3
0.15
0.20
0.25
aaa
–
0.10
–
b
0.20
0.25
0.30
bbb
–
0.10
–
ccc
–
0.10
–
D
3.00 BSC
ddd
–
0.05
–
E
3.00 BSC
e
–
0.5
–
e2
1.10
1.20
1.30
L
0.45
0,58
0.65
L1
0.20
0.29
0.45
L2
–
–
0.125
N
10
ND
5
R1 Ref
–
0.100
–
R2 Ref
–
0.075
–
Q
0_
10_
12_
* Use millimeters as the primary measurement.
0.031
0
0.026
0.006
–
0.008
–
–
–
0.043
0.018
0.008
–
–
–
0_
0.035
0.001
0.028
0.008
0.004
0.010
0.004
0.004
0.118 BSC
0.002
0.118 BSC
0.002
0.047
0.023
0.012
–
10
5
0.003
10_
0.039
0.002
0.030
0.010
–
0.012
–
–
–
0.051
0.026
0.018
0.005
–
–
12_
ECN: S-52448—Rev. B, 28-Nov-05
DWG: 5924
Notes
1, 2
1, 2
1, 2
1, 2
1, 2
5, 11
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2, 9
1, 2
1, 2
5, 11
3
6
5, 11
1, 2
1, 2
NOTES:
1. Dimensioning and tolerancing conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters. All angels are in degrees.
3. N is the total number of terminals.
4. The terminal #1 identifier and terminal numbering convention shall conform to JESD 95-1 SPP-012. Details of terminal #1 identifier are optional, but must
be located within the zone indicated. The terminal #1 identifier may be a molded, marked, or metallized feature.
5. Dimension b applies to metallized terminal and is measured between 0.15 mm and 0.20 mm from the terminal tip.
6. ND refers to the maximum number of terminals on the D side.
7. Profile tolerance (aaa) will be applicable only to the plastic body and not to the metallized features (such as the terminal tips and tie bars.) Metallized
features may protrude a maximum of L2 from the plastic body profile.
8. The corner will be sharp unless otherwise specified with radius dimensions.
9. Package outline is consistent with JEDEC M0229-VEED-2.
www.vishay.com
2
Document Number: 72819
28-Nov-05