BFC233860222 Datasheet, PDF (12/20 Pages) Vishay Siliconix – Interference Suppression Film Capacitors MKP Radial Potted Type

MKP338 6 Y2
Interference Suppression Film Capacitors _{Vishay BCcomponents}
MKP Radial Potted Type
APPROVALS
SAFETY APPROVALS Y2
VOLTAGE
VALUE
FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14 ed-3)
300 V_AC
1 nF to 470 nF
FI 2008062 A1
UL1414 and CSA-C22.2 No 1
antenna coupling
250 V_AC
1 nF to 470 nF
E112471
UL1283
CSA-E384-14-95
CB-Test Certificate
300 V_AC
300 V_AC
300 V_AC
1 nF to 470 nF
1 nF to 470 nF
1 nF to 470 nF
E109565
1377022
FI 5265 A1
The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
®
16
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum space for length (I_max.), width (w_max.), and height (h_max.) of film capacitors to take in account on the printed-circuit
board is shown in the drawings:
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm
• For products with 15 mm < pitch, ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
Eccentricity
w_max. = W + Δ
I_max. = I + Δ
CBA116
h_max. = h + Δ
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
• Storage temperature: T_stg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28114
Revision: 22-Dec-10
For technical questions, contact: [e-mail]
www.vishay.com
375