Z201 Datasheet, PDF (1/1 Pages) Vishay Siliconix – Ultra-Performance Aerospace and Instrumentation Resistor

Z201
Vishay Foil Resistors
Ultra-Performance Aerospace and
Instrumentation Resistor
Product may not
be to scale
The Z201 (0.150 lead spacing) and Z201L (0.200 lead spacing)
Bulk Metal^® Foil resistors represent an industry breakthrough.
This is the 3rd in a series of ultra-precision resistors since the
first Bulk Metal^® Foil resistor was introduced by Vishay in 1962.
Each represents an improvement on the earlier model. The
TCR slope of the Z201 is 0.2ppm/°C (MIL range) and is an
order of magnitude better than the original S102C. The Bulk
Metal^® Foil resistor is the ultimate choice in the most demanding
analog applications.
FEATURES
• Industry Breakthrough
• Nominal TCR: 0.2ppm/°C MIL range*
• Load Life Stability: 0.005% 2000 Hrs @ 0.1Watt
• Absolute Tolerance: To 0.005%
• Resistance Range: 100Ω to 100KΩ
• Power Rating: 0.6Watts @ 70°C (0.3 Watts @ 125°C)
• Current Noise: 0.010µV/V (RMS)
• Thermal EMF: 0.1µV/°C Max; 0.05 Typical
• Rise/Decay Time: 1.0 Nanosecond @ 1KΩ
TABLE 1 - Z201 SPECIFICATIONS
*TCR
0.1ppm/°C Nominal (0°C to 60°C)
0.2ppm/°C Nominal (- 55°C to + 125°C)
0.8ppm/°C Maximum (- 55°C to + 125°C)
Stability
Load Life at 2,000 Hrs
± 0.005% Max ∆R @ 0.1W/+ 70°C
± 0.015% Max ∆R @ 0.3W/+ 125°C
FIGURE 1 - NOMINAL TCR
Load Life at 10,000 Hrs
± 0.01% Max ∆R @ 0.05W/+ 125°C
± 0.05% Max ∆R @ 0.3W/+ 125°C
+100
+50
∆R
R0
(PPM)
-50
-100
-50
-55
0.2PPM/˚C
-25
0
+25 +50 +75 +100 +125
Ambient Temperature (°C)
The TCR is obtained by the process capability and
does not rely on a selection process. It does not vary
from lot to lot nor by ohmic value.
Shelf Life Stability
± 0.0025% Max ∆R after 1 year
± 0.005% Max ∆R after 3 years
Current Noise
0.010µV (RMS)/Volt of applied
voltage (- 40 dB)
High Frequency Operation
Rise/Decay Time
1.0 nanosecond @ 1KΩ
Inductance (L)
0.1µH maximum; 0.08µH typical
Capacitance (C)
1.0pF maximum; 0.5pF typical
Voltage Coefficient
< 0.1ppm/V
Thermal EMF
0.1µV/°C Max; 0.05µV/°C Typical
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
in inches (millimeters)
Front View
0.413
(10.5)
0.350 (8.9)
VISHAY
XXXX
Z201
Date Code
0.138 (3.5)
0.020 (0.5)
Model Number
Rear View
Optional Customer P/N
Print spec., etc. if required
0.040 ±0.005
XXXXXX
250R00
0.01%
Resistance
Value Code
Tolerance
0.75 (19.1) MIN
0.150
(3.81)
Tolerance ± 0.008 (0.2)
Z201 Lead Spacing = 0.150*
Z201L Lead Spacing = 0.200*
ø 0.025 (0.64) #22 AWG
Lead Material - Solder Coated Copper
ORDERING INFORMATION “Z” RESISTORS:
Please specify Vishay “Z” resistors as follows: (See Imprinting
Illustration and Table 1 for further details.)
Example: Z201
250R00
0.01%
MODEL NO. RESISTANCE VALUE
TOLERANCE
Resistance Value, in ohms, is expressed by a series of 6 characters,
5 of which represent significant digits while the 6th is a dual purpose
letter that designates both the multiplier and the location of the comma
or decimal point.
RESISTANCE LETTER MULTIPLIER
RANGE
DESIGNATOR FACTOR
EXAMPLE
100Ω to <1KΩ
R
1KΩ to <100KΩ
K
x1
100R01 = 100.01Ω
x10³
15K231 =15,231Ω
VISHAY FOIL • FRANCE +33.4.93.37.28.24 FAX: [phone]
• GERMANY +49.9287.710 FAX: [phone]
• ISRAEL +972.3.557.0945 FAX: [phone]
• ITALY + 39.2.300.11919 FAX: [phone]
• JAPAN +81.42.729.0661 FAX: [phone]
• SINGAPORE +65.788.6668 FAX: [phone]
www.vishay.com
68
• SWEDEN +46.8.594.70590 FAX: [phone]
• UK [phone] FAX: [phone]
• USA [phone] FAX: [phone]
Document Number 63065
Revision 09-Oct-02