VT2080C-E3 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Trench MOS Schottky technology

VT2080C-E3, VFT2080C-E3, VBT2080C-E3, VIT2080C-E3
www.vishay.com
Vishay General Semiconductor
Dual Trench MOS Barrier Schottky Rectifier
Ultra Low V_F = 0.52 V at I_F = 5 A
TO-220AB
TMBS ^®
ITO-220AB
VT2080C
3
2
1
PIN 1
PIN 2
PIN 3
CASE
TO-263AB
K
123
VFT2080C
PIN 1
PIN 2
PIN 3
TO-262AA
K
FEATURES
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB, ITO-220AB, and
TO-262AA package)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters and reverse battery protection.
2
1
VBT2080C
PIN 1
K
PIN 2
HEATSINK
VIT2080C
3
2
1
PIN 1
PIN 2
PIN 3
K
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F at I_F = 10 A
T_J max.
Package
2 x 10 A
80 V
100 A
0.60 V
150 °C
TO-220AB, ITO-220AB,
TO-263AB, TO-262AA
Diode variations
Common cathode
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB and
TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum







MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (fig. 1)
per device
per diode
V_RRM
I_F(AV)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load per diode
I_FSM
Non-repetitive avalanche energy at T_J = 25 °C, L = 60 mH per diode
Peak repetitive reverse current at t_p = 2 μs, 1 kHz,
T_J = 38 °C ± 2 °C per diode
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
Operating junction and storage temperature range
E_AS
I_RRM
V_AC
T_J, T_STG
VT2080C
VFT2080C VBT2080C
80
20
10
VIT2080C
100
110
1.0
1500
-55 to +150
UNIT
V
A
A
mJ
A
V
°C
Revision: 14-Dec-16
1
Document Number: 89166
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000