VOM160 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, Non-Zero Crossing, 0.5 kV/μs dV/dt, 600 V

www.vishay.com
VOM160
Vishay Semiconductors
Optocoupler, Phototriac Output, Non-Zero Crossing,
0.5 kV/μs dV/dt, 600 V
i179066
A1
C2
4 MT2
3 MT1
DESCRIPTION
The VOM160 series phototriac consist a AlGaAs infrared
emitting diode (IRED) optically coupled to a photosensitive
non-zero crossing TRIAC packaged in a SOP-4 package. It
has a IRED trigger current of 5 mA, 7 mA, and 10 mA.
The VOM160 series phototriac isolate low-voltage logic
from 120 V_AC, 240 V_AC, and 380 V_AC lines to control
resistive, inductive, or capacitive loads including motors,
solenoids, high current thyristors or TRIAC and relays.
FEATURES
• High static dV/dt > 0.5 kV/μs
• Input sensitivity I_FT = 5 mA, 7 mA, and 10 mA
• On-state RMS current I_T(RMS) = 70 mA
• 600 V peak off-state blocking voltage
• Isolation test voltage 3750 V_RMS
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Consumer appliances
• Triac drives
• Solid-state relays
• Motor controls
• Office equipment
AGENCY APPROVALS
• UL1577, file no. E52744, double protection (pending)
• cUL-file no. E52744, equivalent to CSA bulletin 5A
(pending)
• VDE 0884-5, DIN EN 60747-5-5
• CQC (pending)
ORDERING INFORMATION
V
O
M
1
6
0
X
T
PART NUMBER
AGENCY CERTIFIED/PACKAGE
UL, cUL, CQC
5 mA
TRIGGER CURRENT I_FT
7 mA
SOP-4
VOM160NT
VOM160PT
VDE, UL, cUL, CQC
5 mA
7 mA
SOP-4
VOM160N-X001T
VOM160P-X001T
Notes
• For additional information on the available options refer to option information.
• The product is available only on tape and reel.
SOP-4
7.21 mm
10 mA
VOM160RT
10 mA
VOM160R-X001T
Rev. 1.6, 22-May-12
1
Document Number: 81349
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000