VOD223T Datasheet, PDF (1/6 Pages) Vishay Siliconix – Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

www.vishay.com
VOD223T
Vishay Semiconductors
Optocoupler, Photodarlington Output, Dual Channel,
SOIC-8 Package
A1
8C
C2
7E
A3
6C
C4
5E
i179074
DESCRIPTION
The VOD233T is a high current transfer ratio (CTR)
optocoupler. It has a gallium arsenide infrared LED emitter
and silicon NPN photodarlington transistor detector.
This device has CTRs tested at an LED current of 1 mA. This
low drive current permits easy interfacing from CMOS to
LSTTL or TTL.
FEATURES
• High current transfer ratio at I_F = 1 mA,
500 % minimum
• Isolation test voltage, 4000 V_RMS
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code Y
• cUL - file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884) available with option 1
ORDERING INFORMATION
SOIC-8
V
O
D
2
2
3
T
AGENCY CERTIFIED/PACKAGE
UL, cUL, VDE
SOIC-8
PART NUMBER
CTR (%)
≥ 500
VOD223T
6.1 mm
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage
Peak pulsed current
Continuous forward current per channel
Power dissipation
Derate linearly from 25 °C
1 μs, 300 pps
V_R
I_FM
I_F
P_diss
6
V
3
A
30
mA
45
mW
0.4
mW/°C
OUTPUT
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Power dissipation per channel
Derate linearly from 25 °C
BV_CEO
BV_ECO
P_diss
30
V
5
V
75
mW
3.1
mW/°C
COUPLER
Isolation test voltage
Total package dissipation
(2 LEDs and 2 detectors, 2 channels)
t=1s
V_ISO
P_tot
4000
250
V_RMS
mW
Derate linearly from 25 °C
2
mW/°C
Storage temperature
Operating temperature
Soldering temperature ⁽¹⁾
T_stg
-40 to +150
°C
T_amb
-40 to +100
°C
T_sld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Refer to reflow profile for soldering conditions for surface mounted devices (SOP/SOIC).}
Rev. 1.3, 10-Dec-14
1
Document Number: 81959
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000