VO617A-3X017T Datasheet, PDF (1/9 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS

www.vishay.com
VO617A
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 V_RMS
A1
C2
4C
3E
FEATURES
• Operating temperature from -55 °C to +110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 V_RMS
• High collector emitter voltage, V_CEO = 80 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The 110 °C rated VO617A feature a high current transfer
ratio, low coupling capacitance and high isolation voltage.
These couplers have a GaAs infrared diode emitter, which
is optically coupled to a silicon planar phototransistor
detector, and is incorporated in a plastic DIP-4 package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage and clearance distances of > 8.0 mm are
achieved with option 6. This version complies with
IEC 60950 (DIN VDE 0805) for reinforced insulation up to an
operation voltage of 400 V_RMS or DC. Specifications subject
to change.
APPLICATIONS
• AC adapters
• SMPS
• PLC
• Factory automation
• Game consoles
AGENCY APPROVALS
Safety application model number covering all products in
this data sheet is VO617A. This model number should be
used when consulting safety agency documents.
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO EN 60065, EN 60950-1
• CQC GB8898-2011
ORDERING INFORMATION
DIP-4
Option 6
V
O
6
1
7
A
-
#
X
0
#
#
T
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
7.62 mm
Option 7
10.16 mm
AGENCY
CERTIFIED/PACKAGE
UL, cUL, BSI, FIMKO
DIP-4
50 to 600 40 to 80 63 to 125
VO617A VO617A-1 VO617A-2
DIP-4, 400 mil, option 6
-
-
-
SMD-4, option 7
VDE, UL, cUL, BSI, FIMKO
-
50 to 600
-
40 to 80
VO617A-
2X007T
63 to 125
DIP-4, 400 mil, option 6
-
-
-
SMD-4, option 7
-
VO617A- VO617A-
1X017T
2X017T
Note
• Additional options may be possible, please contact sales office.
CTR (%)
5 mA
100 to 200 160 to 320
VO617A-3 VO617A-4
VO617A- VO617A-
3X006
4X006
VO617A- VO617A-
3X007T
4X007T
100 to 200 160 to 320
VO617A- VO617A-
3X016
4X016
VO617A- VO617A-
3X017T
4X017T
> 8 mm
80 to 160 130 to 260
VO617A-7 VO617A-8
-
-
-
80 to 160
VO617A-
7X016
VO617A-
7X017T
-
130 to 260
VO617A-
8X016
VO617A-
8X017T
200 to 400
VO617A-9
-
-
200 to 400
-
VO617A-
9X017T
Rev. 2.1, 18-Oct-13
1
Document Number: 83430
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000