VO4257 Datasheet, PDF (1/8 Pages) Vishay Siliconix – Optocoupler, Phototriac Output, High dV/dt, Low Input Current

VO4257, VO4258
Vishay Semiconductors
Optocoupler, Phototriac Output,
High dV/dt, Low Input Current
A1
C2
NC 3
6 MT2
5 NC
4 MT1
FEATURES
• High static dV/dt 5 kV/µs
• High input sensitivity I_FT = 1.6, 2, and 3 mA
• 700 and 800 V blocking voltage
• 300 mA on-state current
• Isolation test voltage 5300 V_RMS
i179035
DESCRIPTION
The VO4257, VO4258 phototriac consists of a GaAs IRLED
optically coupled to a photosensitive non-zero crossing
TRIAC packaged in a DIP-6 package.
High input sensitivity is achieved by using an emitter follower
phototransistor and a cascaded SCR predriver resulting in
an LED trigger current of 1.6 mA for bin D, 2 mA for bin H,
and 3 mA for bin M.
The new non zero phototriac family use a proprietary dV/dt
clamp resulting in a static dV/dt of greater than 5 kV/µs.
The VO4257, VO4258 phototriac isolates low-voltage logic
from 120 VAC, 240 VAC, and 380 VAC lines to control
resistive, inductive, or capacitive loads including motors,
solenoids, high current thyristors or TRIAC and relays.
APPLICATIONS
• Solid-state relays
• Industrial controls
• Office equipment
• Consumer appliances
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• CUL - file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884) available with option 1
ORDER INFORMATION
PART
REMARKS
VO4257D
VO4257D-X006
VO4257D-X007
VO4257H
VO4257H-X006
VO4257H-X007
VO4257M
VO4257M-X006
VO4257M-X007
VO4258D
VO4258D-X006
VO4258D-X007
VO4258H
VO4258H-X006
VO4258H-X007
VO4258M
VO4258M-X006
VO4258M-X007
700 V V_DRM, l_ft = 1.6 mA, DIP-6
700 V V_DRM, I_ft = 1.6 mA, DIP-6 400 mil
700 V V_DRM, I_ft = 1.6 mA, SMD-6
700 V V_DRM, I_ft = 2 mA, DIP-6
700 V V_DRM, I_ft = 2 mA, DIP-6 400 mil
700 V V_DRM, I_ft = 2 mA, SMD-6
700 V V_DRM, I_ft = 3 mA, DIP-6
700 V V_DRM, I_ft = 3 mA, DIP-6 400 mil
700 V V_DRM, I_ft = 3 mA, SMD-6
800 V V_DRM, I_ft = 1.6 mA, DIP-6
800 V V_DRM, I_ft = 1.6 mA, DIP-6 400 mil
800 V V_DRM, I_ft = 1.6 mA, SMD-6
800 V V_DRM, I_ft = 2 mA, DIP-6
800 V V_DRM, I_ft = 2 mA, DIP-6 400 mil
800 V V_DRM, I_ft = 2 mA, SMD-6
800 V V_DRM, I_ft = 3 mA, DIP-6
800 V V_DRM, I_ft = 3 mA, DIP-6 400 mil
800 V V_DRM, I_ft = 3 mA, SMD-6
Note
For additional information on the available options refer to option information.
This phototriac should not be used to drive a load directly. It is intended to be a trigger device only.
Document Number: 84635
Rev. 1.4, 03-Nov-08
For technical questions, contact: [e-mail]
www.vishay.com
959