VO205AT Datasheet, PDF (1/6 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package

www.vishay.com
VO205AT, VO206AT, VO207AT, VO208AT
Vishay Semiconductors
Optocoupler, Phototransistor Output, with Base Connection
in SOIC-8 Package
A1
8 NC
K2
7B
NC 3
6C
NC 4
5E
i179074
i179002-1
DVE
DESCRIPTION
The VO205AT, VO206AT, VO207AT, VO208AT are optically
coupled pairs with a gallium arsenide infrared LED and a
silicon NPN phototransistor. Signal information, including a
DC level, can be transmitted by the device while maintaining
a high degree of electrical isolation between input and
output. This family comes in a standard SOIC-8A small
outline package for surface mounting which makes them
ideally suited for high density application with limited space.
FEATURES
• High BV_CEO, 70 V
• Isolation test voltage, 4000 V_RMS
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code Y
• cUL - file no. E52744, equivalent to CSA bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5) approved, contact
customer service if this option is required
ORDERING INFORMATION
SIOC-8
V
O
2
0
#
A
T
AGENCY CERTIFIED/PACKAGE
UL, cUL
SOIC-8
PART NUMBER
40 to 80
VO205AT
63 to 125
VO206AT
CTR (%)
100 to 200
VO207AT
6.1 mm
160 to 320
VO208AT
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage
Forward continuous current
Peak forward current
Power dissipation
Derate linearly from 25 °C
1 μs, 300 pps
V_R
I_F
I_FM
P_diss
6
V
60
mA
1
A
90
mW
1.2
mW/°C
OUTPUT
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Collector-base breakdown voltage
I_{Cmax. DC}
I_Cmax.
Power dissipation
Derate linearly from 25 °C
BV_CEO
70
BV_ECO
7
BV_CBO
70
I_{Cmax. DC}
50
t < 1 ms
I_Cmax.
100
P_diss
150
2
V
V
V
mA
mA
mW
mW/°C
COUPLER
Isolation test voltage
Total package dissipation (LED and detector)
Derate linearly from 25 °C
V_ISO
P_tot
4000
240
3.3
V_RMS
mW
mW/°C
Operating temperature
Storage temperature
Soldering time
Note
at 260 °C
T_amb
- 40 to + 100
°C
T_stg
- 40 to + 150
°C
T_sld
10
s
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Rev. 1.2, 22-Nov-12
1
Document Number: 81957
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000