VO14642AT_17 Datasheet, PDF (1/10 Pages) Vishay Siliconix – 1 Form A Solid-State Relay

www.vishay.com
VO14642AT, VO14642AABTR
Vishay Semiconductors
1 Form A Solid-State Relay
S
DC
S'
6
5
4
1
2
3
DESCRIPTION
The VO14642 is a high speed single channel normally open
solid-state relay (SPST - 1 form A) in a DIP-6 package. The
relay is constructed as a multi-chip hybrid device. A high
efficient infrared LED enables low forward current on the
input side. On the output side high performance MOSFET
switches provide a low R_ON and can be configured for
AC/DC or DC only operation.
FEATURES
• High speed SSR - t_on/t_off < 800 μs
• Maximum R_ON 0.25 Ω
• Isolation test voltage 5300 V_RMS
• Load voltage 60 V
• Load current 2 A_DC configuration
• DIP-6 package
• Clean bounce free switching
• TTL / CMOS compatible input
• Available on tape and reel
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Instrumentation
• Industrial controls
• Security
• Automatic measurement equipment
AGENCY APPROVALS
• UL1577
• cUL - UL1577
• DIN EN 60747-5-5 (VDE 0884-5) capable, consult sales
representative for details
Note
• Agency approvals are valid only for ambient temperature range
-40 °C to 85 °C
ORDERING INFORMATION
DIP-6
V
O
1
4
6
4
2
A
x
x
T
R
PART NUMBER
PACKAGE
SMD-6, tape and reel
DIP-6, Tubes
ELECTR. PACKAGE
VARIATION CONFIG.
TAPE AND
REEL
VO14642AABTR
VO14642AT
SMD-6
Rev. 1.6, 12-Jun-17
1
Document Number: 81646
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000