VO1263AAC_13 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Dual Photovoltaic MOSFET Driver Solid-State Relay

www.vishay.com
VO1263AAC, VO1263AACTR, VO1263AB
Vishay Semiconductors
Dual Photovoltaic MOSFET Driver Solid-State Relay
DIP
8
76
5
SMD
1
23
4
i179034_2
- Control 1
+ Control 1
- Control 2
+ Control 2
- Output 1
+ Output 1
- Output 2
+ Output 2
DESCRIPTION
The VO1263AB and VO1263AAC photovoltaic MOSFET
driver consists of two LEDs optically coupled to two
photodiode arrays. The photodiode array provides a floating
source with adequate voltage and current to drive
high-power MOSFET transistors. Optical coupling provides
a high I/O isolation voltage. In order to turn the MOSFET off,
an external resistance (gate-to-source) is required for gate
discharge.
FEATURES
• High open circuit voltage, up to 14.6 V typical
• High short circuit current, up to 42 μA typical
• Isolation test voltage 5300 V_RMS
• Logic compatible input
• High reliability
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• High-side driver
• Solid-state relays
• Floating power supply
• Power control
• Data acquisition
• ATE
• Isolated switching
Note
• See “solid-state relays” (application note 56)
AGENCY APPROVALS
• UL1577
• DIN EN 60747-5-5 (VDE 0884-5)
• FIMKO
• BSI EN 60065, EN 60950-1
• CQC GB8898, GB4943-1
ORDERING INFORMATION
V
O
1
2
6
3
#
#
#
T
R
DIP
SMD
PART NUMBER
PACKAGE
SMD-8
SMD-8, tape and reel
DIP-8
ELECTR. PACKAGE
VARIATION CONFIG.
TAPE AND
REEL
7.62 mm
UL, BSI, VDE, FIMKO
VO1263AAC
VO1263AACTR
VO1263AB
> 0.1 mm
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
SSR
LED input ratings continuous forward current
LED input ratings reverse voltage
Photodiode array reverse voltage
Ambient operating temperature range
Storage temperature range
Pin soldering temperature ⁽¹⁾
Input to output isolation test voltage
I_R  10 μA
I_R  2.0 μA
t = 7.0 s max.
t = 1 min
I_F
V_R
V_R
T_amb
T_stg
T_sld
V_ISO
50
5.0
100
- 40 to + 100
- 40 to + 150
270
5300
mA
V
V
°C
°C
°C
V_RMS
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through}
hole devices (DIP).
Rev. 1.8, 29-May-13
1
Document Number: 84639
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000