VO1263AAC Datasheet, PDF (1/7 Pages) Vishay Siliconix – Dual Photovoltaic MOSFET Driver Solid State Relay

VO1263AAC/VO1263AACTR/VO1263AB
Vishay Semiconductors
Dual Photovoltaic MOSFET Driver Solid State Relay
DIP
8
76
5
SMD
1
2
3
4
i179020_1
– Control 1
+ Control 1
– Control 2
+ Control 2
– Output 1
+ Output 1
– Output 2
+ Output 2
DESCRIPTION
The VO1263AB/AAC photovoltaic MOSFET driver consists
of two LEDs optically coupled to two photodiode arrays. The
photodiode array provides a floating source with adequate
voltage and current to drive high-power MOSFET transistors.
Optical coupling provides a high I/O isolation voltage. In
order to turn the MOSFET off, an external resistance
(gate-to-source) is required for gate discharge.
FEATURES
• High open circuit voltage, up to 14.6 V typical
• High short circuit current, up to 42 µA typical
• Isolation test voltage 5300 V_RMS
• Logic compatible input
• High reliability
• Lead (Pb)-free component
• Component in accordance to RoHS
2002/95/EC and WEEE 2002/96/EC
APPLICATIONS
• High-side driver
• Solid state relays
• Floating power supply
• Power control
• Data acquisition
• ATE
• Isolated switching
Note
See "solid state relays" (application note 56)
AGENCY APPROVALS
UL1577: file no. E52744 system code H or J, double
protection
DIN EN: 60747-5-5
CUL:
file no. E52744, equivalent to CSA bulletin 5A
ORDER INFORMATION
PART
VO1263AAC
VO1263AACTR
VO1263AB
REMARKS
Tubes
Tape and reel
Tubes
PACKAGE
SMD-8
SMD-8
DIP-8
ABSOLUTE MAXIMUM RATINGS ⁽¹⁾
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
SSR
LED input ratings continous
forward current
I_F
50
mA
LED input ratings reverse voltage
Photodiode array reverse voltage
Ambient operating temperature range
Storage temperature range
Pin soldering temperature ⁽²⁾
Input to output isolation voltage
I_R ≤ 10 µA
I_R ≤ 2.0 µA
t = 7.0 s max.
t = 60 s min.
V_R
V_R
T_amb
T_stg
T_sld
V_ISO
5.0
100
- 40 to + 100
- 40 to + 150
270
5300
V
V
°C
°C
°C
V_RMS
Notes
(1) _{Tamb = 25 °C, unless otherwise specified.}
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum
ratings for extended periods of the time can adversely affect reliability.
(2) _{Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through}
hole devices (DIP).
Document Number: 84639
Rev. 1.6, 07-May-08
For technical questions, please contact: [e-mail]
www.vishay.com
249