VLWY9630 Datasheet, PDF (1/7 Pages) Vishay Siliconix – TELUX LED

www.vishay.com
VLWY9630
Vishay Semiconductors
TELUX LED
19232
DESCRIPTION
The TELUX series is a clear, non diffused LED for
applications where supreme luminous flux is required. It is
designed in an industry standard 7.62 mm square package
utilizing highly developed with super bright, AllnGaP
technology.
The supreme heat dissipation of TELUX allows applications
at high ambient temperatures.
All packing units are binned for luminous flux, forward
voltage and color to achieve the most homogenous light
appearance in application.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: TELUX
• Product series: power
• Angle of half intensity: ± 30°
FEATURES
• High luminous flux
• Supreme heat dissipation: R_thJP is 90 K/W
• High operating temperature: T_amb = - 40 °C to
+ 110 °C
• Meets SAE and ECE color requirements for the
automobile industry for color red
• Packed in tubes for automatic insertion
• Luminous flux, forward voltage and color
categorized for each tube
• Small mechanical tolerances allow precise usage of
external reflectors or lightguides
• Compatible with wave solder processes according to
CECC 00802 and J-STD-020
• ESD-withstand voltage: up to 2 kV according to
JESD 22-A114-B
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Exterior lighting
• Tail-, stop- and turn signals of motor vehicles
• Traffic signals and signs
PARTS TABLE
PART
COLOR
VLWY9630
Yellow
LUMINOUS FLUX
(mlm)
MIN. TYP. MAX.
4000 - 12 200
at I_F
(mA)
70
WAVELENGTH
(nm)
MIN. TYP. MAX.
585 592 597
FORWARD VOLTAGE
(V)
MIN. TYP. MAX.
1.83 2.2 3.03
TECHNOLOGY
AlInGaP on Si
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
VLWY9630
PARAMETER
Reverse voltage ⁽¹⁾
DC forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction/ambient
Thermal resistance junction/pin
TEST CONDITION
T_amb ≤ 85 °C
t_p ≤ 10 μs
t ≤ 5 s, 1.5 mm from body preheat
temperature 100 °C/30 s
With cathode heatsink of 70 mm²
SYMBOL
V_R
I_F
I_FSM
P_V
T_j
T_amb
T_stg
T_sd
R_thJA
R_thJP
VALUE
10
70
0.1
212
125
- 40 to + 110
- 40 to + 110
260
200
90
Note
(1) _{Driving the LED in reverse direction is suitable for a short term application}
UNIT
V
mA
A
mW
°C
°C
°C
°C
K/W
K/W
Rev. 1.3, 14-Jun-12
1
Document Number: 81816
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000