VLWR9930 Datasheet, PDF (1/7 Pages) Vishay Siliconix – TELUX LED

www.vishay.com
VLWR9930, VLWR9931, VLWR9932
Vishay Semiconductors
TELUX LED
19232
DESCRIPTION
The TELUX series is a clear, non diffused LED for
applications where supreme luminous flux is required. It is
designed in an industry standard 7.62 mm square package
utilizing highly developed super bright, AllnGaP technology.
The supreme heat dissipation of TELUX allows applications
at high ambient temperatures.
All packing units are binned for luminous flux, forward
voltage and color to achieve the most homogeneous light
appearance in application.
SAE and ECE color requirements for automobile application
are available for color red.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: TELUX
• Product series: power
• Angle of half intensity: ± 45°
FEATURES
• High luminous flux
• Supreme heat dissipation: R_thJP is 90 K/W
• High operating temperature:
T_amb = - 40 °C to + 110 °C
• Meets SAE and ECE color requirements for the
automobile industry for color red
• Packed in tubes for automatic insertion
• Luminous flux, forward voltage, and color
categorized for each tube
• Small mechanical tolerances allow precise
usage of external reflectors or lightguides
• Compatible with wave solder processes according to
CECC 00802
• ESD-withstand voltage: up to 2 kV according to
JESD 22-A114-B
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Exterior lighting
• Tail-, stop-, and turn signals of motor vehicles
• Traffic signals and signs
PARTS TABLE
PART
COLOR
VLWR9930
Red
VLWR9931
Red
VLWR9932
Red
LUMINOUS FLUX
(mlm)
MIN. TYP. MAX.
4000 - 12 200
5000 - 12 200
6000 - 12 200
at I_F
(mA)
70
70
70
WAVELENGTH
(nm)
MIN. TYP. MAX.
611 615 634
611 615 634
611 615 634
FORWARD VOLTAGE
(V)
MIN. TYP. MAX.
1.83 2.2 3.03
1.83 2.2 3.03
1.95 2.2 2.67
TECHNOLOGY
AlInGaP on Si
AlInGaP on Si
AlInGaP on Si
ABOLSUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
VLWR9930, VLWR9931, VLWR9932
PARAMETER
TEST CONDITION
SYMBOL
VALUE
Reverse voltage ⁽¹⁾
DC forward current
Surge forward current
I_R = 100 μA
T_amb ≤ 85 °C
t_p ≤ 10 μs
V_R
10
I_F
70
I_FSM
0.1
Power dissipation
P_V
212
Junction temperature
T_j
125
Operating temperature range
T_amb
- 40 to + 110
Storage temperature range
Soldering temperature
T_stg
t ≤ 5 s, 1.5 mm from body preheat
temperature 100 °C/30 s
T_sd
- 40 to + 110
260
Thermal resistance junction/ambient With cathode heatsink of 70 mm²
R_thJA
200
Thermal resistance junction/pin
R_thJP
90
Note
(1) _{Driving the LED in reverse direction is suitable for a short term application}
UNIT
V
mA
A
mW
°C
°C
°C
°C
K/W
K/W
Rev. 1.4, 14-Jun-12
1
Document Number: 81817
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000