VJOMD-C0G Datasheet, PDF (1/8 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitor Solutions

VJ OMD - C0G (NP0)
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• Surface mountable. Precious metal technology,
wet build process
• OMD-Cap (Open Mode Design) reduce the risk
of shorts or low IR because of board flex cracks
RoHS
COMPLIANT
• High frequency filtering for switching power supplies
• _{Available with 100 % voltage condition,}
process code “5H” is available for 630 V and lower. Contact
[e-mail] for higher voltages
• ^{Available with polymer termination for increase resistance}
to board flex cracking
• Protective surface coating high voltage capacitors maybe
required to prevent surface arcing.
ELECTRICAL SPECIFICATIONS
Note: Electrical characteristics at + 25 °C unless otherwise stated.
Protective surface coating of high voltage capacitors maybe
required to prevent surface arcing.
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 10 pF to 47 nF
Voltage Rating: 50 Vdc to 3000 Vdc
Temperature Coefficient of Capacitance (TCC):
C0G: 0 ± 30 ppm/°C from - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Dissipation Factor:
0.1 % max. at 1.0 V_rms and 1 MHz for values ≤ 1000 pF
0.1 % max. at 1.0 V_rms and 1 kHz for values > 1000 pF
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 MΩ minimum or
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
APPLICATIONS
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors reduce MOSFET voltage spikes
• Lighting Ballasts
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for a
1 to 5 second period and the charge/discharge current does
not exceed 50 mA
≤ 200 Vdc: DWV at 250 % of rated voltage
500 Vdc: DWV at 200 % of rated voltage
630 Vdc: DWV at 150 % of rated voltage
1000 Vdc: DWV at 150 % of rated voltage
1500 Vdc: DWV at 120 % of rated voltage
2000 Vdc: DWV at 120 % of rated voltage
3000 Vdc: DWV at 120 % of rated voltage
www.vishay.com
90
For technical questions, contact: [e-mail]
Document Number: 45047
Revision: 20-Aug-08