|
VJNON-MAGNETIC Datasheet, PDF (1/17 Pages) Vishay Siliconix – Manufactured with non-magnetic materials | |||
|
www.vishay.com
VJ Non-Magnetic Series for Epoxy Bonding
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications (Epoxy Bonding)
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
ï
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 39 nF
Voltage Range: 10 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):ï
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Dissipation Factor (DF):ï
0.1 % maximum at 1.0 VRMS and ï
1 MHz for values ï£ 1000 pFï
0.1 % maximum at 1.0 VRMS and ï
1 kHz for values > 1000 pF
Insulating Resistance:ï
at +25 °C 100 000 Mï min. or 1000 ïF whichever is lessï
at +125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging: 0 % maximum per decade
Dielectric Strength Test:ï
performed per method 103 of EIA 198-2-E.
Applied test voltagesï
ï£ 200 VDC-rated:
500 VDC-rated:
630 VDC, 1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
250 % of rated voltageï
200 % of rated voltageï
150 % of rated voltageï
120 % of rated voltageï
FEATURES
⢠Manufactured with non-magnetic materials
⢠Safety screened for magnetic properties
⢠C0G (NP0) and X7R / X5R dielectrics
⢠Wide range of case sizes, voltage ratings,
and capacitance values
⢠Suitable for conductive epoxy bonding
⢠Wet built process
⢠Reliable Noble Metal Electrode (NME) system
⢠Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
⢠Magnetic Resonance Imaging (MRI)
⢠Medical test and diagnostic equipment
⢠Hi-rel medical systems
⢠Hi-rel aviation systems
⢠Laboratory analysis systems
⢠Navigation and electronic test equipment
⢠Audio amplifiers
NON-MAGNETIC X7R / X5R
ï
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):ï
X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC appliedï
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):ï
ï£ 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHzï
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz ï
ï³ 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:ï
at +25 °C 100 000 Mï min. or 1000 ïF whichever is lessï
at +125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:ï
performed per method 103 of EIA 198-2-E.
Applied test voltagesï
ï£ 200 VDC-rated:
250 % of rated voltageï
500 VDC-rated:
min. 150 % of rated voltageï
630 VDC, 1000 VDC-rated:
150 % of rated voltageï
1500 VDC, 3000 VDC-rated:
120 % of rated voltageï
Revision: 05-Dec-16
1
Document Number: 45128
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |