VJ2220Y224KBEAT4X Datasheet, PDF (1/16 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications

www.vishay.com
VJ OMD Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for
Boardflex Sensitive Applications
FEATURES
• Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
• Excellent reliability and thermal shock
performance
• Efficient low-power consumption, ripple
current capable to 1.2 A_RMS at 100 kHz
• High voltage breakdown compared to
standard design
• 100 % voltage conditioning available up to
630 V_DC rating (process code “5H”)
Contact [e-mail] for higher voltages.
Available
• Polymer termination available for intensive board flex
requirements
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Demanding boardflex applications
• Input filter capacitors
• Output filter capacitors
• Snubber capacitors reduce MOSFET voltage spikes
• High frequency filtering for switching power supplies
• For lighting and other AC applications please contact:
[e-mail]
ELECTRICAL SPECIFICATIONS
C0G (NP0)

GENERAL SPECIFICATION
Note 
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
X7R

GENERAL SPECIFICATION
Note 
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 10 pF to 47 nF
Capacitance Range: 100 pF to 1.8 μF
Voltage Range: 50 V_DC to 3000 V_DC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 V_RMS and 
1 MHz for values  1000 pF
0.1 % maximum at 1.0 V_RMS and 
1 kHz for values > 1000 pF
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
 200 V_DC-rated:
500 V_DC-rated:
630 V_DC/1000 V_DC-rated:
1500 V_DC to 3000 V_DC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage

Voltage Range: 16 V_DC to 3000 V_DC
Temperature Coefficient of Capacitance (TCC):
± 15 % from - 55 °C to + 125 °C, with 0 V_DC applied
Dissipation Factor (DF):
< 50 V ratings 3.5 % maximum at 1.0 V_RMS and 1 kHz
50 V ratings 2.5 % maximum at 1.0 V_RMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
 250 V_DC-rated:
250 % of rated voltage
500 V_DC-rated:
min. 150 % of rated voltage
630 V_DC/1000 V_DC-rated:
150 % of rated voltage
1500 V_DC to 3000 V_DC-rated: 120 % of rated voltage
Revision: 22-Jul-13
1
Document Number: 45198
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000