VJ1812Y472KXGAT Datasheet, PDF (1/15 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications

www.vishay.com
VJ Commercial Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC
FEATURES
• C0G (NP0) and X7R/X5R dielectrics offered
• C0G (NP0) is an ultra-stable dielectric
offering a very low Temperature Coefficient
of Capacitance (TCC)
• C0G (NP0) offers low dissipation
• Excellent aging characteristics
• Ideal for decoupling and filtering (X7R)
• Ideal for surge suppression and high voltage
applications
• Wide range of case sizes, voltage ratings and capacitance
values
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Timing and tuning circuits
• Sensor and scanner applications
• Decoupling and filtering
• Surge suppression
X5R, X7R DIELECTRIC
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(above + 125 °C changed characteristics)
Capacitance Range: 1 pF to 56 nF
Voltage Range: 25 V_DC to 1000 V_DC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 V_RMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 V_RMS and
1 kHz for values > 1000 pF
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
 200 V_DC-rated:
500 V_DC-rated:
630 V_DC,1000 V_DC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(X5R above + 85 °C changed characteristics)
(X7R above + 125 °C changed characteristics)
Capacitance Range: 120 pF to 6.8 μF
Voltage Range: 10 V_DC to 1000 V_DC
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 V_DC applied
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 V_DC applied
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 V_RMS and 1 kHz
16 V/25 V ratings: 3.5 % maximum at 1.0 V_RMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 V_RMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 V_DC-rated:
250 % of rated voltage
500 V_DC-rated:
min. 150 % of rated voltage
630 V_DC, 1000 V_DC-rated:
150 % of rated voltage
Revision: 25-Mar-13
1
Document Number: 45199
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000