|
VJ1812Y472KBGAT4X Datasheet, PDF (1/16 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitor Solutions for Boardflex Sensitive Applications | |||
|
www.vishay.com
VJ OMD Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for
Boardflex Sensitive Applications
ELECTRICAL SPECIFICATIONS
C0G (NP0)
FEATURES
⢠Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
⢠Excellent reliability and thermal shock
performance
⢠Efficient low-power consumption, ripple
current capable to 1.2 ARMS at 100 kHz
⢠High voltage breakdown compared to
standard design
⢠100 % voltage conditioning available up to
630 VDC rating (process code â5Hâ)
Contact mlcc@vishay.com for higher voltages.
⢠Polymer termination available for intensive board flex
requirements
⢠Wet build process
⢠Reliable Noble Metal Electrode (NME) system
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
⢠Demanding boardflex applications
⢠Input filter capacitors
⢠Output filter capacitors
⢠Snubber capacitors reduce MOSFET voltage spikes
⢠High frequency filtering for switching power supplies
⢠For lighting and other AC applications please contact:
mlcc@vishay.com
X7R
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 10 pF to 47 nF
Voltage Range: 50 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values ï£ 1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
At + 25 °C 100 000 Mï min. or 1000 ïF whichever is less
At + 125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
ï£ 200 VDC-rated:
500 VDC-rated:
630 VDC/1000 VDC-rated:
1500 VDC to 3000 VDC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 100 pF to 1.8 μF
Voltage Range: 16 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
± 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):
< 50 V ratings 3.5 % maximum at 1.0 VRMS and 1 kHz
ï³ï 50 V ratings 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 Mï min. or 1000 ïF whichever is less
At + 125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E
Applied test voltages
ï£ 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC/1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated: 120 % of rated voltage
Revision: 25-Mar-13
1
Document Number: 45198
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |