|
VJ0805Y472MXXCW1BC Datasheet, PDF (1/15 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications | |||
|
www.vishay.com
VJ....W1BC Basic Commodity Series
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Commodity Applications
FEATURES
⢠Available from 0402 to 1210 body sizes
⢠Ultra stable C0G (NP0) dielectric
⢠High capacitance in X5R, X7R, Y5V
⢠For high frequency applications
⢠Ni-barrier with 100 % tin terminations
⢠Dry sheet technology process
⢠Noble Metal Electrode system (NME):ï
For certain C0G (NP0) values
⢠Base Metal Electrode system (BME):ï
For X5R, X7R, Y5V and certain C0G (NP0) values
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
⢠Consumer electronics
⢠Telecommunications
⢠Data processing
⢠Mobile applications
ELECTRICAL SPECIFICATIONS
Operating Temperature:
C0G (NP0): - 55 °C to + 125 °C
X5R: - 55 °C to + 85 °C
X7R: - 55 °C to + 125 °C
Y5V: - 25 °C to + 85 °C
Capacitance Range:
C0G (NP0): 0.5 pF to 39 nF
X5R: 47 nF to 100 μF
X7R: 100 pF to 47 μF
Y5V: 10 nF to 100 μF
Voltage Range:
C0G (NP0): 10 VDC to 100 VDC
X5R: 6.3 VDC to 50 VDC
X7R: 10 VDC to 100 VDC
Y5V: 6.3 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
C0G (NP0): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
X5R: ± 15 % from - 55 °C to + 85 °C without voltage applied
X7R: ± 15 % from - 55 °C to + 125 °C without voltage applied
Y5V: + 30 %/- 80 % from - 25 °C to + 85 °C without voltage
applied
Insulation Resistance (IR) at UR:
ï³ 10 Gï or R x C ï³ 500 ï x F whichever is less
Test Conditions for Capacitance Tolerance:
Preconditioning for X5R, X7R, Y5V MLCC: Perform a heat
treatment at + 150 °C ± 10 °C for 1 h, then leave in ambient
condition for 24 h ± 2 h before measurement
Test Conditions for Capacitance and DF Measurement:
Measured at conditions of 30 % to 70 % related humidity.
C0G (NP0): Apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % for
caps ï£ 1000 pF, at + 25 °C ambient temperatureï
Apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % for
caps > 1000 pF, at + 25 °C ambient temperature
X5R/X7R: Caps ï£ 10 μF apply 1.0 VRMS ± 0.2 VRMS,
1.0 kHz ± 10 %, at + 25 °C ambient temperature (1)ï
Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,
120 Hz ± 20 %, at + 25 °C ambient temperature
Y5V:
Caps ï£ 10 μF apply 1.0 VRMS ± 0.2 VRMS,
1.0 kHz ± 10 %, at + 20 °C ambient temperatureï
Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,
120 Hz ± 20 %, at + 20 °C ambient temperature
Note
(1) Test conditions: 0.5 VRMS ± 0.2 VRMS, 1 kHz ± 10 %
X7R: 0603: ï³ 2.2 μF/10 V
0805: 10 μF (6.3 V and 10 V)
X5R: 0402: ï³ 4.7 μF/6.3 V and ï³ 2.2 μF/10 V
0603: 10 μF/6.3 V
Aging Rate:
C0G (NP0): 0 % per decade
X5R: 6.3 VDC/10 VDC: 3 % maximum per decadeï
16 VDC/25 VDC: 2 % maximum per decade
X7R: ï£ 10 VDC: 1.5 % maximum per decadeï
ï³ 16 VDC: 1 % maximum per decade
Y5V: 6.3 VDC: 12.5 % maximum per decadeï
10 VDC/16 VDC: 9 % maximum per decadeï
ï³ 25 VDC: 7 % maximum per decade
Dielectric Strength Test:
This is the maximum voltage the capacitors are tested 1 s to
5 s period and the charge/discharge current does not
exceed 50 mA.ï
ï£ 100 VDC: 250 % of rated voltage
Revision: 27-Mar-13
1
Document Number: 28548
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |