|
VJ0805Y152KXAMT Datasheet, PDF (1/15 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications | |||
|
www.vishay.com
VJ Commercial Series
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC
ï
GENERAL SPECIFICATION
Note ï
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °Cï
(above + 125 °C changed characteristics)
Capacitance Range: 1 pF to 56 nF
Voltage Range: 25 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):ï
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):ï
0.1 % maximum at 1.0 VRMS and ï
1 MHz for values ï£ 1000 pFï
0.1 % maximum at 1.0 VRMS and ï
1 kHz for values > 1000 pF
Insulating Resistance:ï
At + 25 °C 100 000 Mï min. or 1000 ïF whichever is lessï
At + 125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:ï
Performed per method 103 of EIA 198-2-E
Applied test voltagesï
ï£ 200 VDC-rated:
500 VDC-rated:
630 VDC,1000 VDC-rated:
250 % of rated voltageï
200 % of rated voltageï
150 % of rated voltage
ï
FEATURES
⢠C0G (NP0) and X7R/X5R dielectrics offered
⢠C0G (NP0) is an ultra-stable dielectric
offering a very low Temperature Coefficient
of Capacitance (TCC)
⢠C0G (NP0) offers low dissipation
⢠Excellent aging characteristics
⢠Ideal for decoupling and filtering (X7R)
⢠Ideal for surge suppression and high voltage
applications
⢠Wide range of case sizes, voltage ratings and capacitance
values
⢠Wet build process
⢠Reliable Noble Metal Electrode (NME) system
⢠Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
⢠Timing and tuning circuits
⢠Sensor and scanner applications
⢠Decoupling and filtering
⢠Surge suppression
X5R, X7R DIELECTRIC
ï
GENERAL SPECIFICATION
Note ï
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C ï
(X5R above + 85 °C changed characteristics)
(X7R above + 125 °C changed characteristics)
Capacitance Range: 120 pF to 6.8 μF
Voltage Range: 10 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):ï
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 VDC appliedï
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 VDC applied
Dissipation Factor (DF):ï
10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V/25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHzï
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:ï
At + 25 °C 100 000 Mï min. or 1000 ïF whichever is lessï
At + 125 °C 10 000 Mï min. or 100 ïF whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:ï
Performed per method 103 of EIA 198-2-E.
Applied test voltagesï
ï£ 250 VDC-rated:
250 % of rated voltageï
500 VDC-rated:
min. 150 % of rated voltageï
630 VDC, 1000 VDC-rated:
150 % of rated voltage
Revision: 06-May-13
1
Document Number: 45199
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |