VJ0805Q102KXAAT Datasheet, PDF (1/3 Pages) Vishay Siliconix – Multilayer Ceramic Chip Capacitors

VJ High Q Dielectric
Vishay Vitramon
Multilayer Ceramic Chip Capacitors
FEATURES
• COG is an ultra-stable dielectric offering a Temperature
Coefficient of Capacitance (TCC) of 0 ± 30PPM/°C over
the entire temperature range.
• Low Dissipation Factor (DF).
• Ideal for critical timing and tuning applications.
GENERAL SPECIFICATIONS
NOTE: Electrical characteristics @ + 25°C unless otherwise
specified.
Capacitance Range: 1.0pF to 680pF.
Temperature Coefficient of Capacitance (TCC):
0 ± 30PPM/°C from - 55°C to + 125°C.
Dissipation Factor (DF):
0.1% maximum @ 1.0 Vrms and 1kHz for values > 1000pF.
0.1% maximum @ 1.0 Vrms at 1MHz for values ≤ 1000pF.
Insulation Resistance (IR):
@ + 25°C and rated voltage 100,000 Megohms minimum
or 1000 ohm-farads, whichever is less.
@ + 125°C and rated voltage 10,000 Megohms minimum
or 100 ohm-farads, whichever is less.
Dielectric Withstanding Voltage (DWV):
250% of rated voltage for 5 ± 1 seconds, 50 milliamps
current maximum.
ORDERING INFORMATION
VJ
PRODUCT
SERIES
0805
CASE
SIZE
Q
102
DIELECTRIC CAPACITANCE
NOMINAL CODE
K
X
A
CAPACITANCE TERMINATION DC
TOLERANCE
VOLTAGE
RATING
A
T
MARKING PACKAGING
VJ = MLCC
0603
0805
1206
1210
Q = High Q
A = 50V
B = 100V
C = 200V
A = Unmarked
Expressed in picofarads (pF).
The first two digits are
significant, the third is a
multiplier. An “R” indicates a
decimal point.
Examples: 102 = 1000pF.
1R8 = 1.8pF.
X = Nickel barrier
with 100% tin
plated finish
F = Palladium silver
C = ± 0.25pF (1 to 25pF)
D = ± 0.5pF (1 to 50pF)
F = ± 1% (≥ 10pF)
G= ± 2% (≥ 5pF)
J = ± 5% (≥ 2pF)
K = ± 10% (≥ 1pF)
T = 7" Reel, plastic tape
C = 7" Reel, paper tape
R = 11 1/4" Reel, plastic tape
P = 11 1/4" Reel, paper tape
B = Bulk
NOTE: 0402 and 0603
available in paper tape only
Document Number 45050
Revision 06-Apr-01
www.vishay.com
31