VJ0612 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Multilayer Ceramic Chip Capacitors LowInductance

Multilayer Ceramic Chip Capacitors
Low Inductance
VJ0612
Vishay Vitramon
GENERAL SPECIFICATIONS
NOTE: Electrical characteristics at + 25 °C unless otherwise
specified.
Capacitance Range: 8200 pF to 0.33 µF.
Inductance: 0.4 nH.
Temperature Coefficient of Capacitance (TCC):
± 15 % from - 55 °C to + 125 °C.
Dissipation Factor (DF):
25 V ratings, 3.5 % maximum at 1.0 Vrms and 1kHz.
50 V ratings, 2.5 % maximum at 1.0 Vrms and 1kHz.
Aging Rate: 1 % maximum per decade.
FEATURES
∑ Low inductance, typically half the inductance of standard
product.
∑ Reduces AC noise in multi-chip modules (MCM).
∑ Low profile, robust device for easy mounting.
Insulation Resistance (IR):
At + 25 °C and rated voltage 100,000 MW minimum or
1000 WF, whichever is less.
At + 125 °C and rated voltage 10,000 MW minimum or
100 WF, whichever is less.
Dielectric Withstanding Voltage (DWV):
This is the maximum voltage the capacitors are tested for
a 1 to 5 second period and the charge/discharge current does
not exceed 50mA
£ 50V DC : DWV at 250 % of rated voltage.
ORDERING INFORMATION
VJ0612
CASE
CODE
Y
DIELECTRIC
104
K
CAPACITANCE CAPACITANCE
NOMINAL CODE TOLERANCE
X
TERMINATION
A
DC VOLTAGE
RATING
A
MARKING
T
PACKAGING
0612
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Example:
104 = 100 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
X = Ni barrier
100% tin
plated.
J = 16 V
X = 25 V
A = 50 V
A = Unmarked
T = 7” reel / plastic tape
C = 7” reel / paper tape
R = 11 1/4” reel / plastic tape
P = 11 1/4” reel / paper tape
Note
1. DC voltage rating should not be exceeded in application
Document Number 45010
Revision 10-Sep-04
For technical questions contact [e-mail]
www.vishay.com
39