VJ0402Y102KXAAC31 Datasheet, PDF (1/21 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications

www.vishay.com
VJ....31/VJ....34 Automotive MLCC
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
FEATURES
• AEC-Q200 qualified with PPAP available
• Available in 0402 to 1812 body size
• Four dielectric materials
• AgPd termination available for silver epoxy
bonding
• High operating temperature
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Halogen-free according to IEC 61249-2-21 definition
• Compliant to RoHS Directive 2002/95/EC
For more than 20 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have
made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT/NME) with
a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these devices
include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % tin plate matte and AgPd
which is used with silver epoxy bonding. A Polymer (flexible) termination with 100 % tin plate matte finish is offered for intensive
boardflex requirements.
C0G (NP0) DIELECTRIC
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(above + 125 °C changed characteristics 2.3)
Capacitance Range: 1 pF to 22 nF
Voltage Range: 25 V_DC to 3000 V_DC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 V_RMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 V_RMS and
1 kHz for values > 1000 pF
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 V_DC-rated:
500 V_DC-rated:
630 V_DC, 1000 V_DC-rated:
3000 V_DC-rated:
250 % of rated voltage
200 % of rated voltage
150 % of rated voltage
120 % of rated voltage
X5R, X7R, X8R DIELECTRIC
GENERAL SPECIFICATION
Note
Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 150 °C
(X5R above + 85 °C changed characteristics 2.3)
(X7R above + 125 °C changed characteristics 2.3)
Capacitance Range: 120 pF to 1.0 μF
Voltage Range: 10 V_DC to 1000 V_DC
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from - 55 °C to + 85 °C, with 0 V_DC applied ⁽⁵⁾
X7R: ± 15 % from - 55 °C to + 125 °C, with 0 V_DC applied
X8R: ± 15 % from - 55 °C to + 150 °C, with 0 V_DC applied
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 V_RMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 V_RMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 V_RMS and 1 kHz
Insulating Resistance:
At + 25 °C 100 000 M min. or 1000 F whichever is less
At + 125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 V_DC-rated:
500 V_DC-rated:
630 V_DC, 1000 V_DC-rated:
250 % of rated voltage
min. 150 % of rated voltage
150 % of rated voltage
Revision: 05-Aug-11
1
Document Number: 45040
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000