VESD05A8A-HNH Datasheet, PDF (1/7 Pages) Vishay Siliconix – 8-Line ESD-Protection Diode Array in LLP1713-9L

www.vishay.com
VESD05A8A-HNH
Vishay Semiconductors
8-Line ESD-Protection Diode Array in LLP1713-9L
1
8
9
2
7
3
6
4
5
20521
20522
MARKING (example only)
YXX
20719
Dot = pin 1 marking
Y = type code (see table below)
XX = date code
FEATURES
• Ultra compact LLP1713-9L package
• Low package profile < 0.6 mm
• 8-line ESD-protection
• Low leakage current I_R < 1 μA
• Low load capacitance C_D = 30 pF
• ESD-immunity acc. IEC 61000-4-2
± 25 kV contact discharge
± 30 kV air discharge
• Working voltage range V_RWM = 5 V
• e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn)
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ORDERING INFORMATION
DEVICE NAME
ORDERING CODE
VESD05A8A-HNH
VESD05A8A-HNH-GS08
TAPED UNITS PER REEL
(8 mm TAPE ON 7" REEL)
3000
MINIMUM ORDER QUANTITY
15 000
PACKAGE DATA
DEVICE NAME
PACKAGE
NAME
VESD05A8A-HNH LLP1713-9L
TYPE
CODE
B
WEIGHT
3.7 mg
MOLDING COMPOUND
MOISTURE
FLAMMABILITY RATING SENSITIVITY LEVEL
UL 94 V-0
MSL level 1
(according J-STD-020)
SOLDERING
CONDITIONS
260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS
RATING
TEST CONDITIONS
Peak pulse current
Peak pulse power
BiAs-mode: each input (pin 1 to pin 8) to ground (pin 9)
acc. IEC 61000-4-5; t_P = 8/20 μs; single shot
BiSy-mode: each input (pin 1 to pin 8) to any other input pin.
Pin 9 not connected. Acc. IEC 61000-4-5; t_P = 8/20 μs/single shot
BiAs-mode: each input (pin 1 to pin 8) to ground (pin 9)
acc. IEC 61000-4-5; t_P = 8/20 μs; single shot
BiSy-mode: each input (pin 1 to pin 8) to any other input pin
Pin 9 not connected. Acc. IEC 61000-4-5; t_P = 8/20 μs/single shot
Contact discharge acc. IEC61000-4-2; 10 pulses
BiAs-mode: each input (pin 1 to pin 8) to ground (pin 9)
Air discharge acc. IEC61000-4-2; 10 pulses
BiAs-mode: each input (pin 1 to pin 8) to ground (pin 9)
ESD immunity
Contact discharge acc. IEC61000-4-2; 10 pulses
BiSy-mode: each input (pin 1 to pin 8) to any other input pin.
Pin 9 not connected.
Air discharge acc. IEC61000-4-2; 10 pulses
BiSy-mode: each input (pin 1 to pin 8) to any other input pin.
Pin 9 not connected.
Operating temperature
Junction temperature
Storage temperature
SYMBOL
I_PPM
I_PPM
P_PP
P_PP
V_ESD
V_ESD
VALUE
5
2.5
65
33
± 25
± 30
V_ESD
± 12
UNIT
A
A
W
W
kV
kV
kV
V_ESD
± 12
kV
T_J
- 40 to + 125
°C
T_STG
- 55 to + 150
°C
Rev. 1.5, 26-Jun-12
1
Document Number: 81629
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000