VB20100C-M3 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Trench MOS Schottky technology

www.vishay.com
VB20100C-M3, VB20100CHM3
Vishay General Semiconductor
Dual High-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low V_F = 0.50 V at I_F = 5 A
TMBS ^®
TO-263AB
K
2
1
VB20100C
PIN 1
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
Package
TO-263AB
I_F(AV)
V_RRM
I_FSM
V_F at I_F = 10 A
T_J max.
Diode variations
2 x 10 A
100 V
150 A
0.58 V
150 °C
Common cathode
FEATURES
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C
• AEC-Q101 qualified available:
- Automotive ordering code P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters, and reverse battery protection.
MECHANICAL DATA
Case: TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 and HM3 suffix meets JESD 201 class 2 whisker test
Polarity: As marked
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
V_RRM
Maximum average forward rectified current (fig. 1)
per device
per diode
I_F(AV)
Peak forward surge current 8.3 ms single half sine-wave superimposed
on rated load per diode
I_FSM
Voltage rate of change (rated V_R)
dV/dt
Operating junction and storage temperature range
T_J, T_STG
VB20100C
100
20
10
150
10 000
-40 to +150
UNIT
V
A
A
V/μs
°C
Revision: 03-Jan-17
1
Document Number: 87982
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000